Appendices; Camera Maintenance - Canon Powershot Pro70 Hardware Manual

Appendices

Camera Maintenance

Follow the procedures below to clean the
camera body, lens, optical viewfinder and LCD
monitor when they become dirty.
• Never use thinners, benzene, synthetic
cleansers or water to clean the
equipment. These substances may
distort or damage the equipment.
Camera Body
Gently wipe dirt off the camera body with a
soft cloth or an eyeglass lens wiper.
Lens
Use a lens blower to remove dust and dirt.
Keep the lens cap on whenever the camera is
not in use.
98
• Never wipe anything directly on the
lens, even a soft cloth or eyeglass lens
wiper. If particularly stubborn dirt
accumulates, contact your camera
retailer or the closest Canon Customer
Support Help Desk.
Optical Viewfinder
Use a lens blower to remove dust and dirt. If
necessary, gently wipe it with a soft cloth or
eyeglass lens wiper to remove stubborn dirt.
LCD Monitor
Use a lens blower to remove dust and dirt. If
necessary, gently wipe it with a soft cloth or
eyeglass lens wiper to remove stubborn dirt.
• Never rub or press strongly on the LCD
monitor. Rubbing or pressing firmly on
it may lead to damage or other
problems.