Replaying Images - Canon Powershot Pro70 Hardware Manual

• When the upper indicator flashes green,
the autofocus has failed to focus. You
can proceed to take the picture by
pressing the shutter button all the way,
but your subject may not be in focus.
4. After the beeps, press the shutter
button all the way.
A single beep after the shutter button is
pressed indicates that the image has been
captured and is being recorded onto the
CF card. The indicator will flash green
during the recording process.
5. The next image can be shot as soon as
the indicator stops flashing. When you
are finished shooting, set the mode
dial to lock.
• The camera also features a variety of other
modes in addition to that shown above,
such as the continuous shooting mode and
the aperture-priority AE mode. For details,
refer to Shooting, pages 44 to 66.

Replaying Images

You can view your images on the camera's
LCD monitor immediately after taking them.
Mode Dial
LCD Monitor
1. Open the LCD monitor.
2. Set the mode dial to play.
The last recorded image will
display on the LCD monitor.
+
-
39