Victor GENEVA VDTS-5400 Quick Setup Manual

BASIC SETUP OF THE VDTS-5400:
1. Plug the small end of the power cord into the POWER Input on the back of the
unit and the large plug into a standard wall power outlet.
2. Press the STANDBY button on the unit or remote control to turn the unit ON.
3. Press the STANDBY button again on the unit or remote control to turn the unit
OFF.
Connecting the External Speakers
The speaker output sockets are located at the back of the main unit. Speaker input sockets are located at the back of the
speaker box.
1. Unwrap the included speaker cord, plug one end into the left (L) speaker box,
and plug the other end into the left (L) speaker socket on the main unit.
2. Unwrap the included speaker cord and plug one end into the right (R) speaker
box and the other end into the right (R) speaker socket on the main unit.
3.
Ensure the speaker cords are not run in areas that could cause danger
CONNECT BLUETOOTH
1. Press the SOURCE button until the Bluetooth® indicator shows on the LCD
Display with a blink or press the BT button on the remote.
2. Set the Bluetooth® function of your external device to ON and begin searching
for devices. Note: The effective distance between your external device and this
apparatus is 10 meters (33 feet).
3. Once "VICTOR VDTS-5400" appears on the paired devices list of your external
device, select it.
4. If you are asked for a password, enter "0000".
5. A tone will be heard, and the Bluetooth
6. A few seconds later, your Bluetooth
7. If you want the Stereo System changed to pair with another Bluetooth
and the Bluetooth
*This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG &
GRAMOPHONE logo are trademarks used under license by NAXA ELECTRONICS INC. Further information at www.victor-brand.com. All
other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their
respective owners.
READ THE ENTIRE USER MANUAL FOR COMPLETE UNDERSTANDING OF THE PRODUCT'S OPERATION
QUICK SET UP GUIDE
Turntable CD Stereo System
®
® indicator light steadily indicates an established connection.
® connection should be ready.
® indicator will flash on the LCD Display. The unit will go into pairing mode.
GENEVA
VDTS-5400
.
® device, press and hold the PAIR button,