Victor Fremont VWRP-6000 Quick Setup Manual

BASIC SETUP OF THE VWRP-6000:
1. Unpack the unit and remove all packaging materials.
2. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
3. Plug the power adaptor into the electrical outlet and connect other end to
the back of the unit.
4. Extend the FM antennae and install the batteries into remote control.
5. Press the button on the upper right corner of the front panel to turn the
unit on.
PREPARE TURNTABLE FOR PLAYING RECORDS
1. Remove cap protecting stylus.
2. Remove twist tie used to secure the Tone Arm in place.
3. Set the platter on the spindle and place the belt on the motor pulley.
4. Install and adjust the counterweight on the rear of the tone arm.
Note: Further details about preparation for playing records in
instruction manual.
CONNECT BLUETOOTH
®
With the Bluetooth® In function, you can play music from an extenal
Bluetooth device on the speakers of your VWRP-6000.
1. Set the Function Knob to BT/TAPE position.
"Disconnect" will blink on display.
2. Turn on your external Bluetooth device and pair with the
"VICTOR VWRP-6000" device.
3. When the Bluetooth connection is established, you will hear a short
confirmation sound from the unit, and "Connected" will appear on
the display.
4. Start to play your favorite music on the connected device.
CONNECT BLUETOOTH
®
You can play music from your VWRP-6000 on external Bluetooth
speakers, sound bar, earbuds, or headphones.
1. Play music in the CD, AUX, Phono, USB, Tuner or Tape mode.
2. Press and hold
Transmitter function. "BT" will blink on display.
3. Power on your Bluetooth® speakers or headphones and activate its
Bluetooth® pairing mode.
4. Press and hold REPEAT/SCAN button on unit or remote control to
search for external speakers.
5. After a few seconds, the panel will appear the Bluetooth® name of
external speakers. Then press
desired one and press
stop blinking when connected.
6. To change volume playback, turn the volume knob on the unit or
adjust the volume on your Bluetooth® device.
* This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG & GRAMOPHONE logo are
trademarks used under license by NAXA ELECTRONICS INC. Further information at www.victor-brand.com. All other products, services, companies, trademarks,
trade or product names and logos referenced herein are the property of their respective owners.
READ THE ENTIRE USER MANUAL FOR COMPLETE UNDERSTANDING OF THE PRODUCT'S OPERATION
IN
OUT
button to activate Bluetooth®
or button to select the
button to confirm. "BT" will
QUICK SET UP GUIDE
Premium Wood Music Center
®
Fremont
VWRP-6000