Victor BELMONT VWRP-3600 Quick Setup Manual

BASIC SET-UP OF THE VICTOR VWRP-3600
1. Unpack the unit and remove all packaging materials.
2. Place the unit on a flat and level surface. The selected
location should be stable and free from vibration.
3. Plug the power adaptor into a 120V AC electrical outlet
and the other end into the port at the back of the unit.
4. Extend the FM antenna.
5. Turn on the unit by rotating the Volume/Power knob
clockwise until you hear a 'click' sound.
PREPARE TURNTABLE FOR PLAYING RECORDS
1. Remove the stylus protection cap.
2. Remove the twist tie that secures the Tone Arm.
3. Place a vinyl record on the turntable by aligning the Turntable Spindle to the hole in the record.
4. Slide the Speed Selector to match the speed of the record.
5. Release the lever to engage the Tone Arm and begin playing the record.
CONNECT BLUETOOTH
®
With the Bluetooth IN function, you can play music from an external Bluetooth
your VICTOR VWRP-3600.
1. Set the Function Knob to the BT position. 'BT' will blink
on the display.
2. Turn on your external Bluetooth device and pair it with
the 'VICTOR VWRP-3600' device.
3. When the Bluetooth connection is established, you will
hear a short confirmation sound from the unit, and
'BT' will stop blinking on the display.
4. Start to play your favorite music on the connected device.
CONNECT BLUETOOTH
You can play music from your VICTOR VWRP-3600 on external Bluetooth
soundbars, earbuds, or headphones.
1. Disable the Bluetooth
wireless headphones, smartphones, or tablets).
2. Play music in the CD, AUX, PHONO, USB, FM, AM, or Tape mode.
3. Press and hold the Play/Pause/BT OUT button to activate the
Bluetooth Transmitter function. The TX indicator will start to blink
in blue.
4.
Power on your Bluetooth
Bluetooth pairing mode.
5. After a few seconds, the blinking TX indicator will turn solid blue,
and you will hear a beeping sound to indicate that the turntable has
been automatically connected.
6. To adjust the playback volume, rotate the unit volume knob or
adjust the volume on your Bluetooth
7. To turn off BT OUT mode, press and hold the Play/Pause/BT OUT button again. The TX indicator will be
turned off.
* This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR
and the DOG & GRAMOPHONE logo are trademarks used under license by NAXA ELECTRONICS INC. Further
information can be found at www.victoraudio.com. All other products, services, companies, trademarks, trade, or
product names and logos referenced herein are the property of their respective owners.
READ THE ENTIRE USER MANUAL FOR COMPLETE UNDERSTANDING OF THE PRODUCT'S OPERATION
® IN
®
OUT
function on all nearby devices (e.g., amplifiers, soundbars,
®
device (e.g., speakers) and activate its
®
®
device.
QUICK SET-UP GUIDE
8-IN-1 Wood Music Center
REC TX
ERA RX
®
device on the speakers of
REC TX
ERA RX
®
speakers,
REC
ERA
BELMONT
VWRP-3600
TX
RX