FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 4
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation.
TABLE OF CONTENTS FEATURES...............................6 SPECIFICATIONS............................6 PRODUCT OVERVIEW............................7 TURNTABLE PLATTER AND BELT SETUP......................9 CARTRIDGE TRACKING FORCE ADJUSTMENT...................10 SETUP & BASIC OPERATION..........................12 RADIO OPERATION............................13 CD OPERATION..............................13 AUX IN OPERATION............................14 USB OPERATION..............................14 CASSETTE TAPE OPERATION........................15 VINYL RECORD OPERATION..........................16 BLUETOOTH OPERATION..........................17 ® CARE & MAINTENANCE..........................18 HOW TO REPLACE THE STYLUS........................20 TROUBLESHOOTING GUIDE..........................21 SUPPORT................................22...
FEATURES The Fremont Wood Music Center features a great retro design and solid wood construction. With a 3 Speed turntable, CD & Cassette Player the Monument is ready to play all your music! The Dual Bluetooth feature allows streaming of your music to an external speaker. Record and playback all your favorite songs with the built in USB player &...
Remote Control 1. LIGHT MODE button: Press to change the color of the RGB light ring; press and hold to turn off the RGB light ring. 2. MUTE button: Press to mute the unit, press again to resume the audio. 3.
TURNTABLE PLATTER AND BELT SETUP 1. Turn the platter over and check the belt position. Make sure that the drive belt is looped in the middle of the circle. The drive belt located too high or too low in this circle may cause the drive belt to fall off or speed to be unstable. 2.
5. Using your hands, slowly rotate the platter ten circles in a clockwise direction. This step is for resetting the auto mechanism, getting rid of any twists in the belt and making sure the belt rides smoothly along the drive rim on the underside oft he platter. 6.
Page 11
3. Slowly move the tone arm to the position above the tone arm support. Pull out the stylus protector. 4. Carefully rotate the Counterweight until the tone arm achieves a neutral balance. The tone arm should return to this balanced position if it is moved up or down. This adjustment must be done carefully.
Essential Setup 1. Unpack the unit and remove all packaging materials. 2. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 3. Plug the power adaptor into the electrical outlet and connect other end to the back of the unit. 4.
1. Set the Function Knob to TUNER position. 2. Press and hold the EQ/AM/FM button to receive AM or FM signals. Note to extend the FM antennae when you want to listen to FM stations. 3. To search for available stations, you can: a.
AUX IN OPERATION 1. Insert one end of the 3.5mm AUX in cable into the AUX IN Jack on the upper right of the front control panel, the other end to your playing device. 2. Set the Function Knob to PH/AUX position. 3.
Erasing Files on the USB Device 1. Insert a USB device into the USB port and play the song you want to delete. 2. Press and hold the RECORD/ERASE button for about two seconds, “DEL ONE” will appear on the display. 3.
1. Press the Power Button to turn on the unit and open the cover. 2. Set the Function Knob to PH/AUX position. 3. Detach the stylus protector by pulling straight in the direction shown. 4. Place a vinyl record on the Turntable by aligning the Turntable Spindle to the record hole. 5.
1. Set the Function Knob to BT/TAPE position. “Disconnect” will blink on display. 2. Turn on your external Bluetooth device and pair with the “VICTOR VWRP-6000” device. ® 3. When the Bluetooth connection is established, you will hear a short confirmation sound ®...
HOW TO REPLACE THE STYLUS The stylus should last about 200 hours under normal use. However, it is recommended that the stylus be replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus may damage the record.
Made in China * This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG & GRAMOPHONE logo are trademarks used under license by NAXA ELECTRONICS INC. Further information at www.victor-brand.com. All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of...
Need help?
Do you have a question about the FREMONT and is the answer not in the manual?
Questions and answers