Page 1
GENEVA DESKTOP CD SYSTEM VDTS-5400 Instruction Manual Please read carefully before use and keep for future reference...
Page 2
WARNING CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
FEATURES The Geneva Desktop Stereo System with Turntable delivers powerful music playback with a retro style reminiscent of past Stereo Systems. Packed with features including CD & Bluetooth Playback, 3 Speed Turntable, 25X2 Watts of Power, Fully Functioning VU Meters, and detached Speakers with removable covers, the Geneva delivers! •...
PRODUCT OVERVIEW TURNTABLE Turntable DUST COVER TONE ARM WITH STYLUS TONE ARM 45 RPM ADAPTER TONE ARM ON/OFF LEVER AUTO STOP CONTROL SWITCH SPEED SELECTOR (33/45/78 RPM) HOLD DOWN CLIP TONE ARM REST VU METERS / TUN- BUTTON STOP BUTTON Front View SOURCE BUTTON STANDBY BUTTON...
REMOTE CONTROL Remote Control - Requires 2x AAA batteries (Not Included) FM BUTTON POWER BUTTON CD BUTTON PHONO BUTTON MEM BUTTON REPEAT BUTTON TUN- / BUTTON PHONO VOL- BUTTON CLK SET BUTTON OPEN/ REPEAT CLOSE BT BUTTON SCAN/ PROG MUTE BUTTON AUX BUTTON MEM+ BUTTON MEM- BUTTON...
Page 7
Using the Remote Control The Remote-Control Unit can operate the unit from about 24 feet. When operating the remote-control unit, point it (30 degrees horizontal and vertical) towards the front panel of the unit. • Even if the remote-control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.
SETUP & BASIC OPERATION Connecting the external speakers The speaker input sockets are located at the back of the main unit. Unwrap the speaker wire from the left speaker and plug it into the left (L) speaker socket on the main unit.
Volume Adjustment Twist the VOLUME KNOB to adjust the volume. The volume level will be shown in the LCD Display in the top right corner of the unit. NOTE: Depending on the type of music/audio output from the Bluetooth CD Radio Microsystem, the 2 Volume (VU) Meters might not move at lower volumes.
Page 10
Turntable operation Press the STANDBY button to turn on the unit. Press SOURCE button until the display is showed in PHONO mode. Set the SPEED selector to the correct position (33, 45, or 78 RPM). Place the record on the turntable Lift the TONE ARM CONTROL lever and move the TONE ARM to the desired starting point over the record.
NOTE: The effective distance between your external device and this apparatus is 10 meters (33 feet). Once “VICTOR VDTS-5400” appears on the paired devices list of your external device, select it. If you are asked for a password, enter “0000”...
USING THE CD PLAYER Press SOURCE button until the display reads “CD”. Press the OPEN /CLOSE button to open the CD door, put a CD onto the CD tray with the printed label facing up (towards you). To close the CD door, press OPEN /CLOSE button again. Note: Remember to remove the CD when you are finished listening.
USING THE FM RADIO Press the SOURCE button to switch to the FM RADIO. The display will show a radio station:“87.5”. Tune to a desired radio station. The frequency is indicated on the display. MANUAL TUNING: Press the TUN+ or TUN- button briefly and the frequency will tune up or down. AUTO SEARCHING: Press the TUN+ or TUN- button for more than 2 seconds, the radio frequency will start to change on the display.
CARE & MAINTENANCE Depending on the quality of the disc, and the condition of the recording, some CD-R/CD-RW discs may not be playable. How to remove the disc How to hold the disc How to clean the disc Always place the CD in the disc tray with the label facing upward. (CDs can be played only on one side).
TROUBLESHOOTING GUIDE In case of trouble with the unit, please look through the problems below and see if you can solve them yourself before calling your dealer. PROBLEM CAUSE SOLUTION Unit does not turn ON when • Unit is unplugged •...
FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
*This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG & GRAMOPHONE logo are trademarks used under license by NAXA ELECTRONICS INC. Further information at www.victor-brand.com. All other products, services, companies, trademarks, trade or product names and logos referenced herein are the...
Need help?
Do you have a question about the GENEVA VDTS-5400 and is the answer not in the manual?
Questions and answers