Do you have a question about the BELMONT VWRP-3600 and is the answer not in the manual?
Questions and answers
Dale
May 28, 2025
how do you connect external speakers
1 comments:
Mr. Anderson
May 28, 2025
To connect external Bluetooth® speakers to the Victor Belmont VWRP-3600:
1. Disable Bluetooth® on all nearby devices (e.g., amplifiers, soundbars, headphones, smartphones). 2. Play music from a source on the unit (CD, AUX, PHONO, USB, FM, AM, or Tape). 3. Press and hold the Play/Pause/BT OUT button to activate Bluetooth Transmitter mode. The TX indicator will blink blue. 4. Power on your external Bluetooth® speaker and pair it with the VWRP-3600.
Once paired, the music will play through the external Bluetooth® speaker.
This answer is automatically generated
Robert Murray
February 14, 2025
Where is the serial number on my vwrp-3600 unit…? Can’t seem to locate it anywhere
Page 1
BELMONT 8-in-1 Wood Music Center VWRP-3600 Instruction Manual Please read carefully before use and keep for future reference.
Page 3
WARNING CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of suffcient magnitude to constitute a risk of electric shock to persons.
Page 4
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. Unplug the apparatus during lighting storms or when unused for long periods of time. 13.
FEATURES The 8-in-1 Belmont Wooden Music Center features a great retro design and solid wood construction. With a 3-Speed turntable, CD, and Cassette Player, the unit is ready to play all your music! The Dual Bluetooth feature allows streaming of your music to an external speaker. Record and playback all your favorite songs with the built in USB player &...
PRODUCT OVERVIEW Turntable Front Panel Volume +/- Power Repeat /FOL+ Button PROG/FOL- Play/ Pause /BT Out Button ERA Indicator RX Indicator REC Indicator 18. TX Indicator 19. Tuning Knob Back Panel DC IN LINE OUT FM ANTENNA DC IN LINE OUT...
SET-UP & BASIC OPERATION Essential Set-up 1. Unpack the unit and remove all packaging materials. 2. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 3. Plug the power adaptor into a 120V AC electrical outlet and the other end into the port at the back of the unit.
RADIO OPERATION 1. Set the Function Knob to the AM/FM position to receive AM or FM signals. 2. Extend the FM antennae when you want to listen to FM stations. 3. Rotate the Tuning Knob to search for available stations. 4.
AUX IN OPERATION device. and the other end to your playing device. 2. Set the Function knob to the TAPE/AUX position. USB OPERATION 1. Set the Function knob to the USB position. Note Recording with USB 3. Press the RECORD/ERASE button. The recording process will start and the REC Indicator will light up in the lower left corner of the display.
4. Press the STOP/PAIR button to stop recording. 'END' will appear on display. Note: If the unit does not play automatically, press the buttons to listen to the latest record track. Erasing Files In the USB Device 1. Insert a USB device into the USB port and play the song you want to delete. 2.
VINYL RECORD OPERATION 1. Press the Power Button to turn on the unit and open the cover. 2. Set the Function Knob to the 'PHONO' position. 3. Detach the stylus protector by pressing both sides and pulling straight in the direction shown. 4.
1. Set the Function Knob to the BT position. 'BT' and 'RX' will blink on the display. 2. Turn on your external Bluetooth device and pair it with the 'VICTOR VWRP-3600' device. 3. When the Bluetooth connection is established, you will hear a short confirmation sound from the unit, then 'BT' and 'RX' will stop blinking on the display.
CARE & MAINTENANCE Always keep the turntable clean. If the surface of the unit gets dirty, wipe with a soft dry cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. Do not use thinner, benzine, or alcohol as they may damage the surface of the unit.
Page 15
CARE & MAINTENANCE Using Cassette Tapes Tape Handling: ● Use your finger or a pencil to turn the cassette tape's hub and take up any slack tape. ● Avoid touching the tape. Fingerprints attract dust and dirt. ● Avoid dropping or subjecting cassettes to excessive shocks. ●...
Page 16
CARE & MAINTENANCE ● Handle with care, as the stylus is delicate. Use of a bent or broken stylus may damage the record and cause the turntable to malfunction. ● Do not expose the stylus to extreme heat. ● Contact a qualified repair company if you experience difficulty in changing the stylus. Removing an Old Stylus 1.
TROUBLESHOOTING GUIDE In case of trouble with the unit, please look through the problems below and see if you can solve them yourself before calling your dealer. Function Problem Solution ● Check the connection to the AC power source. Make sure the AC source is not a switched outlet and if it is, turn the switch on.
FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including that may cause undesired operation.
* This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG & GRAMOPHONE logo are trademarks used under license by NAXA ELECTRONICS INC. Further information at www.victoraudio.com. All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of...
Page 21
BELMONT Centro de Música de Madera 8-en-1 VWRP-3600 Manual de Operación FAVOR DE LEER EL MANUAL COMPLETAMENTE ANTES DE OPERAR ESTE PRODUCTO. CONSERVAR EL MANUAL PARA FUTURAS REFERENCIAS...
Page 23
ADVERTENCIA PRECAUCIÓN: PARA REDUCIR EL RIESGO DE CHOQUE ELÉCTRICO NO REMOVER LA CUBIERTA (O TAPA), DENTRO DE ESTE APARATO NO HAY PARTES QUE EL USUARIO PUEDA DARLE SERVICIO, EN SU CASO ACUDIR A UN CENTRO DE SERVICIO AUTORIZADO O CON PERSONAL CALIFICADO PRECAUCION: Para reducir el riego de fuego o choque eléctrico, no exponer este producto al goteo o salpicadura de agua, a la lluvia o humedad.
Page 24
superficie similar. El producto no debe colocarse cerca o sobre un radiador o fuentes de calor. Este producto no debe colocarse en un librero o estante que impida el flujo del aire a través de las ranuras de ventilación. Calor. El producto debe colocarse lejos de fuentes de calor como radiadores, registros de calor, estufas u otros productos que producen calor (incluso amplificadores).
Page 25
INDICE CARACTERISTICAS ESPECIFICACIONES DESCRIPCION DE PARTES OPERACION BASICA Y AJUSTES OPERACION DEL RADIO OPERACION DEL DISCO COMPACTO ENTRADA AUXILIAR OPERACION USB OPERACION DEL CASETE OPERACION DEL TOCADISCOS OPERACION BLUETOOTH® CUIDADO Y MANTENIMIENTO GUIA PARA SOLUCION DE PROBLEMAS NOTICIA FCC PRECAUCION SOBRE MODIFICACIONES SOPORTE...
FEATURES El centro de música de madera BELMONT 8 en 1 es un gran diseño retro solido de madera. Con tocadiscos de 3 velocidades, reproductor de Disco Compacto, reproductor de discos de vinil y Casete, ¡la unidad está lista para reproducir la música deseada!. La función dual Bluetooth® permite la transmisión de la música a una bocina externa.
DESCRIPCION DE PARTES Tocadiscos Base giratoria Poste giratorio Tornillo de transporte Palanca Selector de velocidad. Seguro Brazo fonocaptor. Panel Frontal Puerto USB “USB” Puerta del Disco Compacto Entrada Auxiliar “AUX IN” Interruptor / Control de Volumen “VOLUME / ON/OFF” Selector de Función Grabar / Borrar “RECORD/ERA”...
OPERACIÓN BASICA Y AJUSTES Ajustes Esenciales Desempacar la unidad y remover todos los materiales de embalaje. Colocar la unidad sobre una superficie nivelada, estable y libre de vibraciones. Insertar la salida del adaptador ca/cc al conector de entrada de Vcc “DC IN” de la unidad. Conectar el adaptador ca/cc al tomacorriente.
OPERACIÓN DEL RADIO Colocar el selector de función en la posición de FM o AM para seleccionar la función de Radio FM o Extender y direccionar la antena telescópica para lograr una mejor sintonía en el modo de Radio Girar el control de sintonía para sintonizar la estación deseada. Girar el Interruptor/Control de Volumen “VOLUM ON/OFF”, para ajustar el volumen al nivel deseado.
ENTRADA AUXILIAR Esta función permite reproducir una fuente de audio externa a través de las bocinas de la unidad por medio del conector de Entrada Auxiliar de Ø 3.5 mm Insertar un extremo del cable auxiliar (incluido) en el conector de entrada auxiliar “AUX IN° de la unidad, conectar el otro extremo del cable al conector de salida para audífonos del dispositivo de audio externo, como reproductor de CD, Reproductor MP3, Tableta, etc.
Presionar “/PAIR” para detener la grabación, el indicador “END” se enciende en la pantalla. Nota: Si la unidad no reproduce automáticamente la grabación, presionar “/” para reproducir el ultimo archivo grabado. Borrar archivos de la memoria USB Insertar la memoria en el puerto USB y reproducir la canción que desea borrar. Presionar y sostener “RECORD/ERA”...
OPERACIÓN DEL TOCADISCOS Abrir la tapa y aflojar completamente el Tornillo de Transporte girándolo en el sentido de las agujas del reloj con un desarmador. Encender la unidad Colocar el Selector de Función en la posición de “PHONO” Liberar el protector de la aguja, presionando ambos lados y empujando hacia afuera como se observa. Colocar un disco de vinil en la base giratoria, alineando con el poste giratorio.
Asegurarse que la función Bluetooth® del dispositivo externo esta activada (por ejemplo, Teléfono, Tableta, etc.). En el dispositivo externo activar la búsqueda de dispositivos. Seleccionar “VICTOR VWRP-3600” en la lista desplegada. Cuando la conexión Bluetooth® es exitosa, la unidad emite un sonido de confirmación y los indicadores “BT”, “RX”...
CUIDADO Y MANTENIMIENTO Mantener siempre limpia la base giratoria. Si la superficie de la unidad se ensucia, limpiar con una tela suave, limpia y seca o usar un jabón líquido suave diluido. Asegúrese de eliminar por completo cualquier exceso de líquido.
Page 35
CUIDADO Y MANTENIMIENTO No usar discos con forma irregular (octogonal, en forma de corazón, tamaño de tarjeta de presentación, • etc.). Los discos de este tipo pueden dañar la unidad: • Si tiene alguna duda sobre el cuidado y manipulación de un disco CD-R/CD-RW, leer las precauciones proporcionadas con el disco o comunicarse con el fabricante del disco.
Page 36
CUIDADO Y MANTENIMIENTO Cómo reemplazar la cabeza fonocaptora La cabeza fonocaptora debe durar unas 50 horas con un uso normal. Sin embargo, se recomienda reemplazarla tan pronto como note cambios en la calidad del sonido. El uso prolongado de una aguja desgastada puede dañar los discos.
GUIA PARA SOLUCION DE PROBLEMAS En caso de problemas con la unidad, revisar la siguiente guía para solución de problemas y vea si puede resolverlo usted mismo antes de llamar al distribuidor o acudir al centro de servicio autorizado. Función Problema Posible solución •...
NOTICIA FCC Este dispositivo cumple con la parte 15 de las reglas FCC. La operación del aparato está sujeta a las dos siguientes condiciones: (1) Este aparato no puede causar interferencia perjudicial y (2) este aparato debe aceptar cualquier interferencia recibida, incluyendo interferencias que puedan causar un funcionamiento no deseado.
(866) 411-6292 http://www.naxa.com/supportcenter Este producto es fabricado y vendido bajo la responsabilidad de NAXA ELECTRONICS INC. Los logotipos de VICTOR y el Perro con el Fonógrafo son marcas registradas usadas bojo licencia por NAXA ELECTRONICS INC. Para más información en www.victoraudio.com Todos los demás productos, servicios, empresas, marcas registradas, nombres comerciales o de productos y...
Need help?
Do you have a question about the BELMONT VWRP-3600 and is the answer not in the manual?
Questions and answers
how do you connect external speakers
To connect external Bluetooth® speakers to the Victor Belmont VWRP-3600:
1. Disable Bluetooth® on all nearby devices (e.g., amplifiers, soundbars, headphones, smartphones).
2. Play music from a source on the unit (CD, AUX, PHONO, USB, FM, AM, or Tape).
3. Press and hold the Play/Pause/BT OUT button to activate Bluetooth Transmitter mode. The TX indicator will blink blue.
4. Power on your external Bluetooth® speaker and pair it with the VWRP-3600.
Once paired, the music will play through the external Bluetooth® speaker.
This answer is automatically generated
Where is the serial number on my vwrp-3600 unit…? Can’t seem to locate it anywhere