Recording To A Vcr Or Digital Video Device - Canon MVX150i Instruction Manual

4_D74PAL_E(87-99)

Recording to a VCR or Digital Video Device

You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. If you connect a digital video device, you can copy recordings with virtually no
generation loss in image and sound quality.
When connecting a VCR:
❍ Make sure that "H" is not displayed on the screen. If "H" is displayed, change
❍ The quality of the edited tape will be slightly lower than that of the original.
When connecting a digital video device:
❍ You can connect only one device to the camcorder with the DV cable.
❍ Blank sections may be recorded as anomalous picture.
❍ If the picture does not appear, reconnect the DV cable or turn the camcorder
Example: Recording to a VCR
CAMERA
1. Connect the camcorder to the VCR.
See Playing Back on a TV Screen (
2. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
3. Connected device: Load a blank cassette and set the device to record
pause mode.
4. Locate the scene you wish to copy and pause playback shortly before
the scene.
5. Play back the tape.
6. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
7. Stop playback.
Downloaded From CamcorderManual.com Canon Manuals
03.1.28 2:26 PM
the setting ( 69).
off and back on again.
PLAY (VCR)
Page 87
CARD CAMERA
38).
E
CARD CAMERA
87