Internet ready high efficiency 1u ac to dc power supply (21 pages)
Summary of Contents for DuraComm LPB Series
Page 1
Short circuit / over load / over temperature protections Built-in EMI filter Front panel DC output indicator Compatible with all DuraComm LPH Radio Hoods for custom mobile radio mounting Models LPB-12 LPB-12H LPB-15 LPB-24 Operational DC Voltage 13.8...
NOTE: The individual user should take care to determine prior to use or installation whether this device is suitable, adequate, and safe for the use intended. Since individual applications are subject to numerous variations, DuraComm makes no representation or warranty as to the merchantability, suitability, or fitness of these units for any specific application.
Section 2 | Product Overview DuraComm’s LPB Series Power Supply has auto-ranging AC input and can be used without any changes. It also contains a built-in, replaceable sealed lead acid battery that automatically takes over should AC power be disrupted. The DC output operating voltage from the internal battery and AC charger circuitry is delivered to the red and black jacks located on the rear panel.
Section 3 | Installation Fan (not all LPB models) Breaker Input Load < > 1. Connect your DC device (Two-way radio, repeater etc.) to the red (positive) and black (negative) binding posts on the rear of the power supply. 2. BE SURE you connect positive (red) to positive and negative (black) to negative of the DC equipment being powered.
Section 4 | Maintenance Conductor Pretreatment All kinds of copper conductors can be clamped without treatment. DO NOT solder tin stranded conductors. The solder yields and fractures under high pressure. The result is increased contact resistance and excessive temperature rise. Additionally, corrosion has been observed due to the fluxes.
DuraComm reserves the right to change, alter, or improve the specifications of its products at any time, and by so doing, incurs no obligation to install or retrofit any such changes or improvements in or on products manufactured prior to inclusion of such changes.
Need help?
Do you have a question about the LPB Series and is the answer not in the manual?
Questions and answers