Network Connection; Connecting To A Wired Network; Connecting To A Wireless Network - TCL 115X955 Max Operation Manual

Network Connection

Your TV will require an Internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the Internet, you must subscribe to high speed broadband Internet service from your Internet service
provider.
Your TV can be connected to your home network in two ways:
• Wired, using the RJ45 (LAN) connector on the back panel.
• Wireless, using the internal wireless or external wireless USB adapter and your home wireless network.
Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. The
connection method may be different depending on your actual network configuration. If you have any questions about
your home network, please refer to your ISP(Internet Service Provider).

Connecting to a wired Network

To connect to a wired network:
1. Ensure you have:
• An Ethernet cable long enough to reach your TV
• A router or modem with an available LAN port
• A high-speed Internet connection
• A LAN port on the back of the TV
2. Connect your Ethernet cable to the router and to the
LAN port on the back of the TV.
3. Use the Network and internet menu to configure the
TV.

Connecting to a Wireless Network

To connect to a wireless network
1. Ensure you have:
• A router broadcasting a high-speed wireless signal
• A high-speed Internet connection
2. Use the Network and internet menu to configure the
TV.
Note: Please follow below steps to enter the Network and internet menu.
1. P ress on the remote control to display the dashboard menu
2. Select (Settings) and press OK to enter the settings menu.
3. Press Up/Down to select Network and internet, then press OK to enter the submenu and follow the on-screen
guidance to set up your network.
Connections and Setup
Router
LAN port
Wireless router
.
5
Modem Internet
Modem Internet