Works With Alexa; Apple Airplay And Homekit - TCL 115X955 Max Operation Manual

1. Press
on the remote control, select
Network and internet > Wi-Fi, and press OK to turn
it on.
2. To enter the feature, press
control,select Multi Visual, then select your desired
display mode and press OK to connect.
3. Activate the cast screen function on your phone and
choose the TV's name you want to connect in the
searching list.
4. For the first time, depending on different types of
phones, there are two situations: 1) an invitation
prompt appears, select "Accept" and press OK to
connect. 2) enter a correct PIN code to connect as
per the PIN message on the phone.
5. To exit the multi visual function, press
dialog box, then select OK and press OK to confirm.
Notes:
- This feature is not available in any of the cases
below:
a) when TV is in HbbTV, Netfilx or Media Player.
b) if the video from phone/DTV is scrambled.
c) when the capacity of required video decoding
exceeds 4K 60Hz.
- When in full screen mode, due to the compatibility
of the third party's Apps, there might occur failure to
return to the dual views.
- Multiple phones can be used. When in dual view
/
mode, use to move the focus to TV view and
then cast another phone to the TV.
- To check all available history list, select
> System > Multi Visual Settings > Connection
List and press OK to enter.

Works with Alexa

To use the Works with Alexa function, you will need a
device like an Amazon Echo or Amazon Echo Dot (Sold
Separately). Set up your Amazon device. Then, on your
TV go to the Homepage Menu, select Your apps, and
add "works with alexa". Then follow the on screen
prompts. Please note that within the Alexa app on your
phone, you will need to enable the TCL Assistant Skill,
through the Alexa Skills Menu.

Apple AirPlay and HomeKit

Wirelessly share content with your TV using AirPlay and
control your TV using the Home app on your iPhone,
iPad, or Mac. You can set up AirPlay and HomeKit at any
time in Settings menu.
The function is enabled by default. To use the function,
make sure your iPhone, iPad, or Mac is iOS or iPadOS
device and the WiFi on the iOS or iPadOS device is
turned on. Then follow the steps below to operate.
(Settings) >
on the remote
to display a
(Settings)
Using More of Your TV
1. Press
on the remote control, select
System > AirPlay and HomeKit Settings
AirPlay and HomeKit and press OK to enter, or
press (if available) on the remote control, then
select AirPlay and press OK to enter.
2. Press / to select the desired item and press
OK to enter the corresponding submenu.
3. Press to return to the previous menu.
4. For the first time, activate the screen mirroring
function on your iPhone, iPad, or Mac and choose
the TV's name you want to connect in the searching
list.
5. If an AirPlay passcode appears on your TV screen,
enter the passcode on your iOS or iPadOS device.
6. To stop mirroring your iOS or iPadOS device, open
Control Center, tap screen mirroring, then tap stop
mirroring.
Notes:
- If your WiFi is turned off, press
control, select (Settings) > Network and internet
> Wi-Fi, and press OK to turn it on.
- To disable the feature, select
> AirPlay and HomeKit Settings > Apple AirPlay
and HomeKit > AirPlay and press OK to turn it off.
- Apple, AirPlay, HomeKit and Siri are trademarks
of Apple Inc., registered in the U.S. and other
countries and regions.
- To use AirPlay and HomeKit with this Smart TV
Pro, the latest version of iOS, iPadOS, or macOS
is recommended.
15
(Settings) >
>
Apple
on the remote
(Settings) > System