Changing The Embroidery Position; Checking The Embroidery Area - Brother PE-150 User Manual

Changing the embroidery position

Checking the embroidery area

44
Touch the arrow key that corresponds to the direction in which
you would like to move the pattern. The embroidery position will
then move.
* If you touch the "CENTER" key, the embroidery position will
return to the center.
* Use the hole on the embroidery foot as a guide, and never
lower the needle while it is moving.
Example: To move the embroidery position to the
upper right corner
Touch the "????" key.
* The embroidery position or area display can be moved by
touching the corresponding arrow key. If the arrow key is
touched once, the frame and display will move one step; if
the key is touched continuously, the frame and display will
move continuously.
If "TRIAL" is touched, the embroidery frame will move and the
presser foot will trace the embroidery area to be used for the
currently selected pattern and size.
* Do not lower the needle. Use the hole of the presser foot as
a guide instead.