Brother QL-1060N User Manual page 42

Problem
• The printed barcode
cannot be read.
• I want to reset the printer/
delete the data
transferred from PC.
• I want to cancel the
current printing job.
• When printing via the USB
cable, the printer
repeatedly pauses and
then continues printing.
• Depending on the type of the
scanner, it cannot be read. Use
different scanner. We recommend
to print the barcode with print
setting as Give priority to quality.
Also, set the label vertical to the
print head as shown right.
• To reset the printer, turn OFF the printer. Press ON/OFF button and CUT
button six times. All the transferred data from PC will be deleted and reset the
machine to factory setting.
• Make sure that the printer is ON, and press ON/OFF button.
• Is the printer set for sequential printing?
If so, set print mode to buffered printing.
(Open printer properties from [Control
Panel]-[Printer and FAX] and click [Printing
Preferences...] button in the [General] tab.
Choose the option "After one page of data
is received".)
• An alternative solution is to disconnect the
LAN cable until USB printing is completed.
42
Solution
Print
head
Label
Potential types of problems
Recom-
mended
print
direction