Inserting A Tape Cassette - Brother PT-2700 User Manual

GETTING STARTED
Tape cassettes of 9/64", 1/4", 3/8", 1/2", 3/4", or 1" (3.5mm, 6mm, 9mm, 12mm, 18mm,
or 24mm) width can be used in your P-touch labeler. Use only Brother tape cassettes
with the mark.
If the new tape cassette has a cardboard stopper, be sure to remove
the stopper before inserting the cassette.
1
Check that the end of the tape is not bent and
that it passes through the tape guide.
2
After making sure that the power is off, lift open the
tape compartment cover. If there is already a tape
cassette in the machine, remove it by pulling it
straight up.
3
Insert the tape cassette into the tape
compartment, with the end of the tape
facing the machine's tape exit slot, and
press firmly until you hear a click.
When inserting the tape cassette,
make sure that the tape and ink
ribbon do not catch on the print head.

Inserting a Tape Cassette

18
Inserting a Tape Cassette
End of tape
Tape guide
Tape exit slot