Brother PT-2700 User Manual page 13

Battery
Please note the following to avoid liquid leakage, heat, rupture of the battery.
Do not throw into fire, heat up, or disassemble the battery.
AC adapter
Please note the following to avoid fire, electric shock, or failure.
Always use the specified voltage
(120V) and the suggested AC adapter
(AD-60).
Do not overload the power outlet.
Do not drop, hit or otherwise damage
the AC adapter.
Do not place heavy objects on,
damage or modify the power cord or
plug. Do not forcibly bend or pull the
power cord.
Battery
Please note the following to avoid liquid leakage, heat, rupture of the battery.
Do not use old and new batteries
together.
Do not mix alkaline batteries with other
type batteries.
AC adapter
Be sure to disconnect the AC adapter
from the power outlet and the P-touch
labeler when not using the P-touch
labeler for any extended period of
time.
Tape Cutter
Please note the following to avoid personal injury and damage of the P-touch
labeler.
Do not touch the blade of the cutter
unit.
Do not open the tape compartment
cover when operating the cutter unit.
WARNING
Do not use a damaged power cord.
Do not touch the AC adapter or power
plug with wet hands.
Do not use the AC adapter in places of
high humidity such as bathrooms.
Make sure that the plug is fully
inserted to the power outlet. Do not
use an outlet that is loose.
CAUTION
Do not set the positive and negative
end in the wrong position.
Remove the batteries if you do not
intend to use the P-touch labeler for an
extended period of time.
Always hold the plug when
disconnecting the power cord from the
power outlet.
Do not apply excessive pressure to the
cutter unit.
1
2
3
4
5
6
7
8
9
7
Safety Precautions