Brother MFC-9460CDN Software User's Manual page 222

Network Scanning
Note
• Scan to Network is available when Scan to Network profiles are configured by using Web Based
Management.
• YOU MUST CONFIGURE THE SNTP PROTOCOL (NETWORK TIME SERVER), OR YOU MUST SET
THE DATE, TIME AND TIME ZONE CORRECTLY FOR AUTHENTICATION. FOR MORE
INFORMATION, SEE NETWORK USER'S GUIDE.
To use Web Based Management, type http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP
address of your machine) into your browser, and then you can configure or change the settings in
FTP/Network Scan Profile in Administrator Settings. You can configure up to ten Scan to Network profiles
and you can choose what profile numbers (1 to 10) to use for Scan to Network settings in FTP/Network Scan
Settings.
In addition to the seven preset file names you can store two user defined file names that can be used for
creating an Scan to Network profile.
Choose FTP/Network Scan Settings in Web Based Management. In Create a User Defined File Name,
enter a file name in one of the two user defined fields and click Submit. A maximum of 64 characters can be
entered in each of the user defined name fields.
Note
Using certain characters or symbols in a file name may cause a problem accessing the file. We
recommend to only use combinations of the following characters in a file name.
13
215