Brother MFC-9460CDN Software User's Manual page 200

Scanning (For USB cable users)
Resolution
Color 100 dpi
Color 200 dpi
Color 300 dpi
Color 600 dpi
Gray 100 dpi
Gray 200 dpi
Gray 300 dpi
B&W 200 dpi
B&W 200x100 dpi
a
Put a USB Flash memory drive into your machine.
b
Load your document.
c
Press (SCAN).
d
Press a or b to choose Scan to USB.
Press OK.
If your machine does not support Duplex Scan, go to step f.
If your machine supports Duplex Scan, go to step e.
e
Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
f
Choose one of the options below:
 To change the setting press a or b to choose Change Setting. Press OK and go to step g.
 To start scanning with the settings you set in the Function Menu (Menu, 5, 2), choose Start Scan.
Press OK and go to step k.
g
Press a or b to choose the quality you want.
Press OK.
h
Press a or b to choose the file type you want.
Press OK.
If you choose color or Gray in the resolution setting, go to step i.
If you choose black & white in the resolution setting, go to step j.
Note
• If you choose color or Gray in the resolution setting, you cannot choose TIFF.
• If you choose black & white in the resolution setting, you cannot choose JPEG or XPS.
• If you choose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 0-9 before
it starts scanning.
File Format Options
PDF / PDF/A / Secure PDF / Signed PDF / JPEG / XPS
PDF / PDF/A / Secure PDF / Signed PDF / JPEG / XPS
PDF / PDF/A / Secure PDF / Signed PDF / JPEG / XPS
PDF / PDF/A / Secure PDF / Signed PDF / JPEG / XPS
PDF / PDF/A / Secure PDF / Signed PDF / JPEG / XPS
PDF / PDF/A / Secure PDF / Signed PDF / JPEG / XPS
PDF / PDF/A / Secure PDF / Signed PDF / JPEG / XPS
PDF / PDF/A / Secure PDF / Signed PDF / TIFF
PDF / PDF/A / Secure PDF / Signed PDF / TIFF
12
193