Download Print this page
Toa HY-TM7B-WP Installation Manual
Toa HY-TM7B-WP Installation Manual

Toa HY-TM7B-WP Installation Manual

Speaker rigging bracket

Advertisement

Quick Links

SPEAkER RIGGING bRACkET
Thank you for purchasing TOA's Speaker Rigging Bracket.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read
all the instructions in this section for correct and
safe operation.
• Be sure to follow all the precautionary instructions
in this section, which contain important warnings
and/or cautions regarding safety.
• After reading, keep this manual handy for future
reference.
WARNING
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
• Refer all installation work to the dealer from whom
the speaker was purchased. Installation onto the
ceiling requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.
• Install the unit only in a location that can structurally
support the weight of the speaker and the mounting
bracket. Doing otherwise may result in the speaker
falling down and causing personal injury and/or
property damage.
• Owing to the speaker's size and weight, be sure
that at least two persons are available to install the
speaker. Failure to do so could result in personal
injury.
• Do not use other methods than specified to mount
the bracket. Extreme force is applied to the bracket
and the speaker could fall off, possibly resulting in
personal injuries.
• U se safety wires when installing speakers. If not
used, personal injury could result if a speaker
should accidentally fall.
• Attach the safety wire to the speaker. If not attached,
the speaker could fall off, resulting in personal injury.
INSTALLATION MANUAL
HY-TM7b-WP
HY-TM7W-WP
• Use nuts and bolts that are appropriate for the
ceiling's structure and composition. Failure to do so
may cause the speaker to fall, resulting in material
damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that
the bracket has no loose joints after installation
to prevent accidents that could result in personal
injury.
• Use the HX-7B-WP or HX-7W-WP Speaker System
in combination. Doing otherwise may cause the
speaker to fall off, resulting in personal injury.
• Do not mount the speaker in locations exposed
to constant vibration. The rigging bracket can be
damaged by excessive vibration, potentially causing
the speaker to fall, which could result in personal
injury.
• Avoid installing the speaker in locations close to the
seashore or in indoor swimming facilities that are
not well ventilated. In such locations, the bracket
may be vulnerable to corrosion, eventually allowing
the speaker to fall resulting in personal injury.
CAUTION
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
• Avoid touching the bracket's sharp metal edge to
prevent injury.
• Do not stand or sit on, nor hang down from the
bracket as this may cause the speaker to fall down
or drop, resulting in personal injury and/or property
damage.
• Have the bracket checked periodically by the shop
from where it was purchased. Failure to do so may
result in corrosion or damage to the speaker or its
rigging bracket that could cause the speaker to fall,
possibly causing personal injury.

Advertisement

loading
Need help?

Need help?

Do you have a question about the HY-TM7B-WP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toa HY-TM7B-WP

  • Page 1 INSTALLATION MANUAL SPEAkER RIGGING bRACkET HY-TM7b-WP HY-TM7W-WP Thank you for purchasing TOA’s Speaker Rigging Bracket. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. 1. SAFETY PRECAUTIONS • Use nuts and bolts that are appropriate for the ceiling’s structure and composition. Failure to do so may cause the speaker to fall, resulting in material • Before installation or use, be sure to carefully read damage and possible personal injury. all the instructions in this section for correct and safe operation. • Tighten each nut and bolt securely. Ensure that • Be sure to follow all the precautionary instructions...
  • Page 2 2. GENERAL DESCRIPTION The HY-TM7 Series Speaker Rigging Brackets are used to hang the HX-7B-WP or HX-7W-WP Speaker System directly from ceilings, beams or other building structures, including under outdoor eaves. 3. NOTES ON INSTALLATION • Observe the following instructions when installing the speaker [Vertical installation] system. Failure to do so could adversely affect their intended weather- Horizontal resistant capability, leading to malfunction. · Install the speaker system in locations not exposed directly to rain, such as under eaves. · All speaker modules must point downward from the horizontal. • Two joined HX-7 Series Speaker Systems cannot be installed with this bracket. 4. INSTALLATION S tep 1. Mount this bracket to a ceiling, beam, etc. using the bolts. Bolts and nuts for mounting the bracket on the ceiling or beam are not supplied.
  • Page 3 S tep 2. Mount the speaker system to this bracket. • U se safety wires when installing speakers. If not used, personal injury could result if a speaker should accidentally fall. • O wing to the speaker's size and weight, be sure that at least two persons are available to install the unit. Failure to do so could result in personal injury. WARNING • T ighten the bolts securely, as instructed below. Failure to follow instructions precisely could result in a falling speaker and potential personal injury.
  • Page 4 5. SPECIFICATIONS Model No. HY-TM7B-WP HY-TM7W-WP Finish Stainless steel, black, semi-gloss, Stainless steel, white, semi-gloss, paint paint Dimensions 433 (w) x 57 (h) x 295 (d) mm (17.05" x 2.24" x 11.61") Weight 2.5 kg (5.51 lb) Note: The design and specifications are subject to change without notice for improvement. • Accessories Hex head bolt M6 x 12 with spring and plain washers ... 2 Hex head bolt M6 x 30 with spring and plain washers . .. 1 Flange nut for M6 ............ 1 Spacer ø9.2 (0.36") ............ 2 J-spacer ................ 1 URL: http://www.toa.jp/ 133-01-00045-00...

This manual is also suitable for:

Hy-tm7w-wp