Out Of Memory Message - Brother MFC-8440 User Manual

Out of Memory message

If the memory becomes full while you
are making copies, the LCD message
will guide you through the next step.
If the Out Of Memory message
appears, press
Start
to copy scanned pages. You will need to clear some jobs from
the memory before you can continue.
To gain extra memory, you can turn off Fax Storage.
(See Setting Fax Storage on page 8-3.)
—OR—
Print the faxes that are in the memory. (See Printing a fax from
the memory on page 5-5.)
When you get an Out Of Memory message, you may be able to
make copies if you first print incoming faxes in the memory to restore
the memory to 100%.
Then if this error message appears more than once you may
wish to consider increasing the memory size. For more
information on how to increase the memory size, See Memory
board on page 23-1.
Stop/Exit
to cancel or
Out of Memory
Copy:Press Start
Quit:Press Stop
MAKING COPIES 10 - 5