Table of Contents
Advertisement
SWITCHING ON
1. If the Indicator is not lit, then the TV set is powered off. You must press the On/OFF button
on the TV set.
The set will switch to stand-by mode and then the Indicator will illuminate in Red.
2. Press the POWER button on the remote controller or the POWER button on the TV set when
the indicator is red.
The TV set will be switched on and the indicator will be changed to green.
SWITCHING OFF
1. Press the POWER button on the remote controller or the POWER button on the TV set to
return the set to its stand-by mode. The Indicator will illuminate in Red.
2. Press the On/OFF button on the TV set to switch the TV set off completely.
NOTE:
If you turn the TV off, the present time that you have set will disappear.
If you don't use the set for extended periods of time, unplug the AC cord from Power outlet.
The Recall button on the remote controller is used to
display the current status;
Mode (TV, Video, Component, PC), Signal
information, the Programme number, MGDi, and
PIP information, Time are displayed.
Basic Operation
Switching On and Off
Recall
21
Information
Source :
TV
Pr 1
Signal
:
Pal
PIP/POP :
Off
MGDi
:
Off
Clock
: -- -- : --
Advertisement
Table of Contents
