Preparation
Inserting Batteries into the Remote Control Unit
To load the batteries, turn the remote control
handset over and open the battery compartment.
Insert the batteries (Two 1.5v, type R03 or AA).
Make sure that the polarity matches with the (+)
and (-) marks inside of the battery compartment.
Note: To avoid damage from possible battery
leakage, remove the batteries if you do not
plan to use the remote control handset for
an extended period of time.
1. Connect the AC plug to AC input terminal, rear of the set.
2. Plug the other end of AC cord into a Power outlet with 220V - 240V ~, 50Hz.
CONNECTING THE TV DIRECTLY TO AN AERIAL
Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV
set.
Mains Connection
Aerial Connection
Aerial Terminal
10
Aerial
Aerial cable