Table of Contents
Advertisement
Get Ready
Exis ng light switch (to be replaced) or
new box with wiring ready (neutral wire
required)
At least 2 inches of box depth is required
(2 1/8" deep boxes are typical)
Screwdriver (Phillips, recommended),
wire strippers and voltage tester
If there is no neutral line in the wall box, STOP
installing the switch and consult with a
professional electrician
Begin Installa on:
Turn off circuit(s) at the breaker or fuse
panel, and confirm there is no voltage in
the box before star ng the installa on
(there may be mul ple live circuits
within the switch box)
Unscrew and remove the switch plate;
then use a voltage tester to confirm the
circuit is dead
7
Advertisement
Table of Contents
Need help?
Do you have a question about the YS5705-UC and is the answer not in the manual?
Questions and answers