Master MFG ETI-AC Assembly

BEFORE ASSEMBLING YOUR TRAILER
FOLLOW INSTRUCTIONS IN YOUR SPOT
SPRAYER ASSEMBLY MANUAL
TOOLS REQUIRED
1/2" SOCKET WRENCH PLIERS
NOTE:
ONCE YOU HAVE FINISHED THE SPOT SPRAYER AND TRAILER ASSEMBLY,
MOVE ON TO THE BOOM ASSEMBLY CARD, TO COMPLETE YOUR SPRAYER.
1.
PARTS
None
Set the Front Tank Mount onto the Frame Spine near the slots in
the middle of the Frame Spine.
Firmly rotate the Front Tank Mount until the tabs of the mount lock
into the slots in the Frame Spine.
INCLUDED
COMPONENTS
Axle (1)
31-100464 or 31-100469
Wheel (2)
TWA410/350-4
1/2" Hex Bolts (4)
33-100114
2.
NOTE: It is possible you may
need to use a rubber mallet
or a soft impact tool to fully
lock the tank mount into
the slot.
None
Attaches Front Tank Mount to Frame Spine
Press the tabbed end of the Frame Spine into the slots under the
Axle Bracket.
Firmly rotate the Axle Bracket until its top plate locks into and is
flush with the Frame Spine.
HAVING TROUBLE? CALL SUPPORT AT: 800.825.5397
Frame Spine (1) Front Tank Mount (1)
31-100461 or 31-100468 31-100462 or 31-100467
Right Boom Mount (1) Left Boom Mount (1)
31-100465 or 31-100472 31-100466 or 31-100471
1" Hex Bolt (2) Flange Nuts (8)
33-100116 33-100113
PARTS
Axle Bracket (1) Lock Pin (1)
31-100463 or 31-100470 905PA
Top Hitch Plate (1) Bottom Hitch Plate (1)
31-100121 31-100138
1" Carriage Bolts (2) Cotter Pins (2)
33-100112 33-100091
Attaches Axle Bracket to Frame Spine