Important Safeguards; Read And Follow All Safety Instructions - ETC ArcSystem Pro D1 Series Installation Manual

Introduction
Congratulations on your purchase of ArcSystem products. ArcSystem is a family of overhead
LED products designed for installations where dimming, light quality, and ease of installation
are absolutely essential. With ArcSystem, you will experience perfectly smooth dimming from
100% down to absolute zero. ArcSystem luminaires come in a variety of form factors, beam
angles, and color-temperature options, all with high-efficiency optics and an outstanding
quality of light ideal for any application.
ArcSystem products with ArcMesh can be controlled using wired DMX or the wireless ArcMesh
protocol. ArcSystem products without ArcMesh can be configured for RDM control. This
manual provides step by step instruction on the installation of ArcSystem Pro One-Cell
luminaires, D1 and D2 Series Drivers, and full system integration. For more information on
ArcMesh, the D1 Driver Quick Connect, or other ArcSystem Pro drivers and luminaires, see the
manuals listed below. All ETC manuals are available for download free of charge at
etcconnect.com.
• ArcSystem Pro Installation Manual for information on ArcSystem Pro One-Cell and Multi-
Cell luminaires with wireless ArcMesh control using the ArcSystem Pro TX1 Transmitter
• ArcSystem Pro D4 Drivers Installation Guide for information on installing the D4 Series
drivers and one-cell luminaires
• ArcSystem Pro Multi-Cell RDM Installation Guide for information on installing RDM multi-
cell luminaires
Safety
ArcSystem products are intended for professional use only. Read the entire manual before
using this equipment.

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed
including the following:
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
• Do not use outdoors.
• Do not let power supply cords touch hot surfaces.
• Do not mount near gas or electric heaters.
• Equipment should be mounted in locations and at heights where it will not
• The use of accessory equipment not recommended by the manufacturer may
• Do not use this equipment for other than intended use.
SAVE THESE INSTRUCTIONS
Introduction
readily be subjected to tampering by unauthorized personnel.
cause an unsafe condition.
1