For toyota hilux 2005 model 4.0l vvt-i v6 petrol (1gr-fe engine) (6 pages)
Summary of Contents for SAFARI V-SPEC SS661HF
Page 1
HOSE - RADIATOR OVERFLOW EXTENSION 000-987-100 CABLE TIE - 2.5mm x 100mm 000-914/B CLAMP - HOSE - SIZE 56 (BLACK) 525-017-000 TEMPLATE - SNORKEL BODY Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 1 of 9...
Page 2
With the template correctly aligned on the guard panel, use a felt tip pen to mark all hole positions. Remove the Template. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 2 of 9...
Page 3
Paint holes to prevent rust. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 3 of 9...
Page 4
NEW ZEALAND INSTALLATIONS ONLY Safari have developed 2 methods of Snorkel A pillar attachment, for the conventional method please proceed with the current document alternatively please see the link below for further instructions. www.safari4x4.co.nz/apillarmounting Fasten the Upper Mounting Bracket (Item 3) to the...
Page 5
3 hole positions. Remove the air cleaner adaptor and drill the three marked hole positions with a 5mm drill bit. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 5 of 9...
Page 6
Remove the overflow bottle and drill the two hole positions with a 3.5mm drill bit. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 6 of 9...
Page 7
(Item 12). Secure the overflow bottle into position with two self tapping screws (Item 19). Secure the air conditioning pipe back into the pipe support clips. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 7 of 9...
Page 8
Ensure that the air entry hose is correctly positioned onto the snorkel body snout and air cleaner adaptor. Orientate the 80/100mm hose clamps (Item 14) into position and tighten. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 8 of 9...
Page 9
Align the air ram assembly and tighten the black hose clamp (Item 24). NB It is the installer's responsibility to ensure that all connections are water tight. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 9 of 9...
Need help?
Do you have a question about the V-SPEC SS661HF and is the answer not in the manual?
Questions and answers