Page 1
SCREW – S/T 4.8mm x 16mm 000-951-500 TEMPLATE 485-017-200 TEMPLATE – AIR CLEANER DUCT 485-217-000 TEMPLATE – CONNECTING DUCT 485-217-200 HOSE CLAMP – SIZE 56 (BLACK) 000-914/B Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 1 of 5...
Page 2
Tape the template to the upper and rear edges of the left hand guard. Using a felt tip pen, mark all hole positions. Remove template. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 2 of 5...
Page 3
With the snorkel body correctly positioned, fasten to the guard using necessary hardware. Fasten the upper mounting bracket to the “A” pillar using necessary hardware. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 3 of 5...
Page 4
Install the air ram assembly to the snorkel body, and fasten the hose clamp. NB: It is the installer’s responsibility to ensure all connections are water tight. Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 4 of 5...
Page 5
Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia – www.safari4x4.com.au Page 5 of 5...