Table of Contents
Advertisement
Contacts
Note: You can store numbers up to 64 digits
long, but every 20 digits must be
separated by a pause or wait. See
"Creating Pauses and Waits" on page 39.
• A Speed Dial number — When you store a
phone number, it is assigned a Speed Dial
number. You can accept the default Speed Dial
number or change it.
• A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This icon
appears to the left of the Contacts type icon if a
voice name is assigned.
Viewing Contacts
To access Contacts:
From the main menu, select Contacts. -or-
If you are on a call: Press m. Select Contacts.
To view entries:
1 From the Contacts list, scroll to the entry you
want to view.
2 If an entry has more than one number or
<>
address stored,
icon. Scroll left or right to view the icon for each
number stored in the entry.
3 Press O to view the entry.
36
surrounds the Contacts type
4 Scroll to view the other numbers and addresses
stored for the entry.
Tip: To view more entries, continue scrolling.
Searching for a Name
To search for a name in Contacts:
1 From the Contacts list, press A under Search.
-or-
If Search is not one of your options: Press m.
P
Select Search.
2 Enter the name you want to see.
3 Press O.
Your phone finds the name you entered or the
nearest match.
Showing Only LINC IDs,Talkgroups
To set Contacts to show only entries that contain
LINC IDs and Talkgroups:
1 From the Contacts list, press m.
2 Select Filter.
3 Set this option to Show Prvt/Grp.
To set Contacts to show all entries:
1 From the Contacts list, press m.
2 Select Filter.
Advertisement
Table of Contents
