Activating Service; Powering On And Off - Motorola I560 - SOUTHERNLINC Manual

Iden digital multi-service data-capable phone
Table of Contents

Advertisement

Getting Started
Removing the Battery
1 With the phone powered off, remove the battery
door.
2 Remove the battery by lifting it out from the side.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
-4°F (-20°C).
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
6
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.

Activating Service

The first time you power on your phone, you must
be in your local calling area. This activates your
service.

Powering On and Off

The first time you power your phone on, a screen
may appear asking you to update your browser
information. This means you must enable security.
To power your phone on:
1 Open the flip.
2 Press p.
Note: Pressing p for more than 5 seconds turns
on Airplane mode. See "Airplane Mode—
Temporarily Turning Off Calls" on page
100.
To power your phone off:
1 Open the flip.
2 Press and hold p.

Advertisement

Table of Contents
loading

This manual is also suitable for:

I560

Table of Contents