Jetson JetKart 3.0 Manual
  1. Manuals
  2. Brands
  3. Jetson Manuals
  4. hoverboards
  5. JetKart 3.0
  6. Manual

Jetson JetKart 3.0 Manual

Hoverboard attachment
Hide thumbs
Table of Contents

Advertisement

Quick Links

JetKart
3.0
®
Hoverboard Attachment.
A guide for your ride.
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
MODEL SKU: JKAR30-BLK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JetKart 3.0 and is the answer not in the manual?

Questions and answers

Related Manuals for Jetson JetKart 3.0

Summary of Contents for Jetson JetKart 3.0

  • Page 1 JetKart ® Hoverboard Attachment. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODEL SKU: JKAR30-BLK...
  • Page 3 Jetson's top two riding rules: Be safe. Have fun!

  • Page 4: Table Of Contents

    Contents Safety Warnings ........................4 Warranty Coverage .
  • Page 5 3. Making Moves ....................4 1 3.1 Getting on the JetKart®...

  • Page 6: Safety Warnings

    Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;...

  • Page 7: Warranty Coverage

    • AVERTISSEMENT- Risque d’incendie et de choc électrique - Aucune des pièces ne peut être réparée par l’utilisateur. MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.

  • Page 8: About Your Product

    1. About Your Product What's in the Box 1. REAR FRAME 5. CENTER CONNECTOR . SEAT BASE 6. FRONT FRAME 2. SEAT BACK FOOTREST 3. HANDLES (×2) WHEEL 4. ADJUSTABLE BRACKETS (×2, LEFT AND RIGHT) 7. VELCRO STRAP (×4, 2 PRE-ATTACHED PLUS 2 SPARE) HARDWARE AND TOOLS INCLUDED FOR ASSEMBLY: SMALL BOLTS SMALL NUTS...
  • Page 9 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.

  • Page 10: Product Specs

    Product Specs · WEIGHT LIMIT: 220 LB · PRODUCT WEIGHT: 12.6 LB · RECOMMENDED AGE: 12+ · WHEEL SIZE: 4” · DIMENSIONS: 38.6 - 46.0” (L) × 18.3” (W) × 13.1 - 14.6” (H)

  • Page 11: Online Resources

    Online Resources Scan for our most updated JetKart ® onboarding materials and support resources.

  • Page 12: Getting Started

    HAND AND FOOT WILL BE. · IMPORTANT: THE JETKART 3.0 HAS ADJUSTABLE BRACKETS THAT MAKE IT COMPATIBLE WITH MOST, BUT NOT ALL, JETSON HOVERBOARDS. ENSURE A SNUG AND SECURE FIT OF THE BRACKETS ON YOUR HOVERBOARD (SECTION 2.2) BEFORE CONTINUING WITH THE ASSEMBLY PROCESS OR TAKING A RIDE.

  • Page 13: Sizing The Jetkart® For Your Hoverboard

    Sizing the JetKart for your Hoverboard* ® IMPORTANT: ENSURE THAT YOUR HOVERBOARD IS POWERED OFF WHEN SIZING UP THE BRACKETS. · THE JETKART®’S BRACKETS REST ON THE LEFT AND RIGHT FOOTPADS OF THE HOVERBOARD. THE BRACKET LEGS MUST BE SNUG AROUND THE FRONT AND BACK EDGES OF THE HOVERBOARD SO THAT THE MIDDLE OF THE BRACKETS REST ON THE FOOT PADS.
  • Page 14 TO RESIZE THE BRACKETS: 1. REMOVE THE VELCRO STRAP FROM EACH BRACKET. SET THE STRAPS ASIDE. 2. REMOVE THE BRACKETS FROM THE HOVERBOARD. 3. LOCATE THE TWO BOLTS GOING THROUGH THE SIDES OF EACH BRACKET; THEY ARE SECURED ON THE OTHER SIDE BY A WASHER AND BOLT. (2 PER BRACKET, 4 TOTAL) 4.
  • Page 15 5. SET ALL HARDWARE ASIDE. (4 BOLTS, 4 NUTS, AND 4 WASHERS— 2 EACH FROM EACH BRACKET.) 6. SLIDE THE BRACKET LEGS DOWN OFF OF THE CENTER BRACKET PIECE. CENTER BRACKET PIECE BRACKET LEG BRACKET LEG...
  • Page 16 7. REPOSITION THE BRACKET LEGS CLOSER IN OR FURTHER OUT ON THE CENTER BRACKET PIECE TO RESIZE THE BRACKET FOR YOUR HOVERBOARD, AND SLIDE THEM BACK UP ONTO THE BRACKET. 8. REST THE BRACKETS ON THE HOVERBOARD TO SEE IF FURTHER ADJUSTMENTS ARE NECESSARY. 9.
  • Page 17 10. RE-INSERT ONE OF THE REMOVED BOLTS THROUGH THE HOLES IN THE OVERLAPPING BRACKET PIECES FROM THE SIDE OF THE BRACKET WITH THE HOURGLASS-SHAPED CUT-OUT. 11. SLIP A WASHER AND THEN TWIST A NUT ONTO THE END OF THE BOLT. USE THE 4MM ALLEN KEY TO HOLD THE BOLT STEADY WHILE YOU TIGHTEN THE NUT ALL THE WAY ONTO THE BOLT BY TURNING IT CLOCKWISE WITH THE WRENCH.
  • Page 18 12. REPEAT STEPS 10 AND 11 WITH THE OTHER 3 HARDWARE SETS SO THAT ALL 4 ADJUSTABLE BRACKET LEGS (A) ARE SECURED ON THE CENTER BRACKET PIECE (B). 13. CHECK THAT THE BRACKET LEGS ARE SECURE. CENTER BRACKET PIECE BRACKET LEG BRACKET LEG...

  • Page 20: Attaching The Handles

    HANDLE (C) Attaching the Handles 1. INSERT ONE HANDLE (C) INTO THE HANDLE TUBE EXTENDING DIAGONALLY UPWARDS FROM THE TOP OF ONE BRACKET (D), SUCH THAT THE HANDLEBAR BENDS TOWARD THE SIDE OF THE BRACKET WITH THE HOURGLASS-SHAPED HOLE. 2. ROTATE THE HANDLE IN THE TUBE SO THAT: ·...
  • Page 21 HANDLE BRACKET HANDLE TUBE HOURGLASS HOLE...
  • Page 22 HANDLE PHILLIPS-HEAD SCREWDRIVER TIP BOLT 3. FROM THE SIDE OF THE BRACKET TOWARDS WHICH THE HANDLE BENDS, USE THE SCREWDRIVER-TIP OF THE 2-BIT TOOL TO TWIST ONE OF THE SMALL BOLTS CLOCKWISE INTO THE ALIGNED HOLES OF THE BRACKET TUBE AND THE HANDLE. 4.
  • Page 23 HANDLE PHILLIPS-HEAD SCREWDRIVER TIP BOLT (OPPOSITE SIDE; NOT SHOWN) BRACKET 5. HOLD THE NUT STEADY AND FULLY TIGHTEN THE BOLT INTO THE NUT BY TURNING IT CLOCKWISE WITH THE SCREWDRIVER. 6. REPEAT STEPS 1-5 WITH THE OTHER BRACKET, HANDLE, BOLT, AND NUT. 7.

  • Page 24: Attaching The Brackets

    Attaching the Brackets 1. POSITION ONE BRACKET ON EACH SIDE OF THE SEAT BASE SUCH THAT THE HANDLES EXTEND FORWARD FROM THE SEAT BACK SUPPORT. 2. SLIDE BOTH BRACKETS ONTO THE SEAT BASE CROSSBAR. SEAT BACK SUPPORT BRACKET HANDLE SEAT BASE CROSSBAR SEAT BASE...
  • Page 25 HOURGLASS HOLE BRACKET LARGE BOLT 15MM WRENCH 3. TWIST A LARGE BOLT CLOCKWISE INTO THE HOURGLASS-SHAPED HOLE OF EACH BRACKET. TIGHTEN THE BOLTS BY TURNING EACH ONE CLOCKWISE WITH THE 10MM WRENCH.
  • Page 26 4. CHECK THAT THE BRACKETS ARE SECURE ON THE SEAT BASE.

  • Page 28: Attaching The Seat Back

    SEAT BACK (B) SEAT BACK STEM Attaching the Seat Back 1. POSITION THE SEAT BACK (B) OVER THE REAR FRAME (A) SUCH THAT THE SEAT BACK STEM IS ABOVE THE SEAT BACK SEAT BACK SUPPORT AND THE PADDED SEAT BACK SUPPORT SEAT BASE IS FACING THE FRONT OF THE SEAT BASE.
  • Page 29 SEAT BACK SEAT BACK STEM 3. POSITION THE SEAT BACK SUCH THAT THE HOLE IN THE SEAT BACK SUPPORT IS KNOB ALIGNED WITH ONE OF THE HOLES IN THE SEAT BACK STEM. 4. FROM THE BACK, INSERT A KNOB INTO THE ALIGNED HOLES BY TWISTING IT IN CLOCKWISE.

  • Page 30: Assembling The Frame

    Assembling the Frame 1. POSITION THE CENTER CONNECTOR (E) ON YOUR WORK SURFACE SO THAT THE SIDE WITH THE LARGER HOLES IS FACING UP. 2. POSITION THE REAR FRAME (A) AND FRONT FRAME (F) ON OPPOSITE ENDS OF THE CENTER CONNECTOR SO THAT THE FRAME BARS ARE IN LINE.
  • Page 31 4. AS NECESSARY, ADJUST THE PIECES UNTIL THE HOLES IN THE CENTER CONNECTOR ARE ALIGNED WITH THE HOLES IN THE FRONT FRAME AND REAR FRAME BARS. FRONT FRAME BAR CENTER CONNECTOR REAR FRAME BAR...
  • Page 32 5. INSERT 1 KNOB INTO BOTH SETS OF ALIGNED HOLES AND, WHILE APPLYING A SLIGHT DOWNWARD PRESSURE ON THE KNOB, TWIST IT CLOCKWISE IT IS FULLY INSERTED. 6. CHECK THAT THE KNOBS AND FRAME PIECES ARE SECURE. KNOB KNOB...

  • Page 34: Attaching The Jetkart To Your Hoverboard

    Attaching the JetKart to your Hoverboard ® IMPORTANT: POWER OFF YOUR HOVERBOARD BEFORE ATTACHING THE JETKART® TO IT. 1. PLACE YOUR JETKART® ON THE GROUND AND PLACE YOUR HOVERBOARD BEHIND IT SO THAT THE SIDE OF THE HOVERBOARD WITH THE POWER BUTTON IS VISIBLE FROM THE BACK OF THE JETKART®. 2.
  • Page 35 BRACKET STRAP SLOT VELCRO STRAP 4. SLIDE A VELCRO STRAP THROUGH THE SLOT ON THE REAR OF EACH BRACKET. 5. PULL THE STRAPS TIGHT AND FOLD THE ENDS OF THE STRAPS OVER.
  • Page 36 VELCRO STRAP HOVERBOARD 6. PRESS THE VELCRO ON EACH FOLDED END OF THE STRAP FIRMLY ONTO THE VELCRO ON THE MIDDLE OF THE STRAP. 7. WRAP THE LOOSE END OF EACH STRAP UNDER THE HOVERBOARD AND UP THROUGH THE SLOTS ON THE FRONT OF THE BRACKETS. 8.

  • Page 37: Adjusting The Length Of The Jetkart

    Adjusting the Length of the JetKart ® THE JETKART® CAN BE SIZED TO SUIT EACH RIDER. WHEN SEATED AND WITH FEET POSITIONED ON THE FOOTREST, A RIDER’S KNEES SHOULD BE SLIGHTLY BENT. 1. TWIST ONE OR BOTH KNOBS ON TOP OF THE CENTER CONNECTOR (B) COUNTERCLOCKWISE TO LOOSEN AND REMOVE.
  • Page 38 2. PUSH OR PULL TO SLIDE THE REAR FRAME (A) AND FRONT FRAME (C) IN THE CENTER CONNECTOR UNTIL THE HOLES ON TOP OF THE CENTER CONNECTOR ARE ALIGNED WITH NEW SIZING HOLES ON BOTH PARTS OF THE FRAME. SIZING HOLE REAR FRAME FRONT FRAME SIZING HOLE...
  • Page 39 3. RE-INSERT EACH REMOVED KNOB INTO THE ALIGNED HOLES. APPLY A SLIGHT DOWNWARD PRESSURE ON THE EACH KNOB AND TWIST CLOCKWISE UNTIL IT IS FULLY INSERTED. 4. CHECK THAT THE FRAME IS SECURE.

  • Page 40: Adjusting The Height Of The Seat

    Adjusting the Height of the Seat THE SEAT BACK CAN BE SET AT TWO POSITIONS: HIGH AND LOW. 1. REMOVE THE KNOB FROM THE SEAT BACK STEM BY TWISTING IT OUT COUNTERCLOCKWISE. SEAT BACK STEM KNOB...
  • Page 41 2. RAISE OR LOWER THE SEAT BACK UNTIL THE HOLE IN THE SEAT BACK STEM IS ALIGNED WITH THE OTHER SIZING HOLE ON THE REAR SIDE OF THE SEAT BACK SUPPORT. SEAT BACK STEM SIZING HOLE SEAT BACK SUPPORT...
  • Page 42 3. RE-INSERT THE KNOB INTO THE ALIGNED HOLES BY TWISTING IT IN CLOCKWISE. 4. CHECK THAT THE SEAT BACK IS SECURE.

  • Page 43: Making Moves

    3. Making Moves Getting on the JetKart ® IMPORTANT: DO NOT TURN ON THE HOVERBOARD BEFORE YOU SIT DOWN. IF THE HOVERBOARD IS POWERED ON BUT NOT LEVELED WHEN YOU TURN IT ON, THE HOVERBOARD WILL PROPEL THE JETKART® FORWARD OR BACKWARD IMMEDIATELY.

  • Page 44: Riding The Jetkart

    Riding the JetKart ® IMPORTANT: TIGHTEN ALL BOLTS, NUTS, AND KNOBS BEFORE EACH RIDE. TO GO FORWARD - PUSH DOWN BOTH HANDLES TO BRAKE/REVERSE - PULL UP BOTH HANDLES TO TURN RIGHT – PUSH DOWN LEFT HANDLE TO TURN LEFT – PULL UP LEFT HANDLE AND AND PULL UP RIGHT HANDLE PUSH DOWN RIGHT HANDLE...

  • Page 45: Helmet Safety

    Helmet Safety A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES. PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS.

  • Page 46: Care & Maintenance

    KEEP AWAY FROM FIRE AND EXCESSIVE HEAT. · AVOID INTENSE PHYSICAL SHOCK, SEVERE VIBRATION, OR IMPACT. · RIDE THE JETKART® ON A SMOOTH, FLAT SURFACE. · PROTECT FROM WATER OR MOISTURE. · CONTACT THE JETSON CARE TEAM IF THERE ARE ANY ISSUES WITH THE JETKART®.
  • Page 47 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
  • Page 48 Date Code: 07/2024 Document Edition: v1.0 © 2024, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.

This manual is also suitable for:

Jkar30-blk

Table of Contents

Save PDF