Subscribe to Our Youtube Channel
Related Manuals for Jetson REMIX JETKART
Summary of Contents for Jetson REMIX JETKART
- Page 1 Remix Jetkart + All-Terrain Hoverboard. ® A guide for your ride. IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY MODEL: JREMIX-BLK | JREMIX-BB Designed in Brooklyn | Made in China...
- Page 3 Remember to be safe and, most importantly, have fun!
-
Page 5: Table Of Contents
Table of Contents Safety Warnings .......................4 What’s in the Box .......................6 Specs &... -
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 For more information go to www.p65warnings.ca.gov/product MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from Jetson Customer Care. This will void any warranty, and can lead to malfunctions which may cause injury.
-
Page 8: What's In The Box
What’s in the Box 1. FRAME 2. SEAT 3. HOVERBOARD 4. BRACKET ( × 2) 5. VELCRO STRAP ( × 2) 6. FOOTREST ( × 2) 7. NOSE CAP HARDWARE / TOOLS INCLUDED FOR ASSEMBLY: *SPARE PARTS* A (×1) B (×1) C1 (×1) A ( ×... - Page 9 PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 10: Specs & Features
Specs & Features REMIX JETKART®: • PRODUCT WEIGHT: 16.5 LB • DIMENSIONS: 46.7” (L) × 22.8” (W) × 14” (H) • ADJUSTABLE LENGTH: MIN 34.6” | MAX 46.1” • TIRE SIZE: 4” • WEIGHT LIMIT: 220 LB • RECOMMENDED AGE: 12+ REMIX HOVERBOARD: •... -
Page 12: Attaching The Seat
1. Get Started Attaching the Seat • FLIP SEAT RIGHT SIDE UP AND MAKE SURE TO PLACE ON A SOFT SURFACE. ALIGN FRAME TO MATCH BOLT HOLES. • PLACE WASHER (B) ONTO BOLT (A) AND THREAD BOLT INTO THE HOLE UNTIL FAIRLY TIGHT. •... - Page 13 • MAKE SURE SEAT IS SECURELY ATTACHED.
-
Page 14: Inserting The Brackets
Inserting the Brackets • INSERT RIGHT BRACKET INTO RIGHT SIDE OF THE REAR HORIZONTAL AXIS. • SCREW BRACKET IN PLACE USING BOLT (D). • INSERT LEFT BRACKET INTO LEFT SIDE OF THE REAR HORIZONTAL AXIS. • SCREW BRACKET IN PLACE USING BOLT. NOTE: BE CAREFUL NOT TO OVER-TIGHTEN THE BOLTS. - Page 15 • MAKE SURE BRACKETS ARE SECURELY ATTACHED.
-
Page 16: Attaching The Nose Cap
Attaching the Nose Cap NOSE CAP • SNAP NOSE CAP ONTO FRONT PLATE OF REMIX. • SCREW (C1) NOSE CAP INTO PLACE VIA THE UNDERSIDE OF THE FRAME. NOTE: DO NOT OVER-TIGHTEN THE NOSE CAP. DOING SO MAY CAUSE THE NOSE CAP TO CRACK. - Page 17 • MAKE SURE IT IS SECURELY ATTACHED.
-
Page 18: Inserting The Footrests
Inserting the Footrests • INSERT FOOTREST INTO EACH SIDE OF THE FRONT TUBE ON THE REMIX FRAME. • ALIGN FOOTREST WITH SCREW HOLES ON THE FRONT TUBE. • USING THE SMALL SCREW (C2) SUPPLIED, SCREW PEDALS IN PLACE. FOOTREST... - Page 19 • MAKE SURE FOOTREST ARE SECURELY IN PLACE.
-
Page 20: Adjusting The Footrest
Adjusting the Footrest OPEN CLAMP, THEN LOOSEN KNOBS. NOTE: OVEREXTENDING THE FOOTREST CAN CAUSE THE FRONT WHEEL TO SHAKE. SLIDE THE FOOTREST TUBES CLAMP TO DESIRED LENGTH KNOB... - Page 21 • SECURE FOOTREST IN PLACE BY CLOSING CLAMPS. • FINALLY, TIGHTEN KNOBS.
-
Page 22: Attaching The Hoverboard
HOVERBOARD Attaching the Hoverboard • MAKE SURE SIDE OF HOVERBOARD WITH CHARGING PORT IS FACING OUT. • HOVERBOARD MUST BE TURNED OFF BEFORE PLACING REMIX ON TOP OF IT. VELCRO STRAPS... - Page 23 PULL THE VELCRO STRAPS TIGHT AND FOLD.
- Page 24 • MAKE SURE HOVERBOARD IS SECURELY IN PLACE.
-
Page 25: Charging The Hoverboard
Charging the Hoverboard • ONLY USE THE INCLUDED CHARGER • PLUG THE CHARGER INTO THE WALL BEFORE THE CHARGING PORT • DON’T TURN ON THE REMIX HOVERBOARD WHILE IT’S CHARGING • CHARGE THE BATTERY UNTIL IT IS FULLY CHARGED - UP TO 4 HOURS - CHARGING - CHARGE COMPLETE INDICATOR LIGHT... -
Page 26: Indicator Lights
Indicator Lights BATTERY INDICATOR LIGHT STATUS INDICATOR LIGHT BATTERY INDICATOR LIGHT PERCENTAGE < 20% 20-49% 50% + *MUST CHARGE FOR 4 HOURS TO REACH 100% BATTERY LEVEL. WARNING: THE HOVERBOARD WILL AUTOMATICALLY SLOW DOWN AND TILT UP ONCE THE BATTERY POWER GOES BELOW 10% AS A SAFETY PRECAUTION. STATUS INDICATOR LIGHT STATUS... -
Page 27: Connecting To Bluetooth
THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY THE BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY JETSON ELECTRIC BIKE LLC. IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS. -
Page 28: Recalibrating The Hoverboard
Recalibrating the Hoverboard 1.10 HOLD POWER BUTTON FOR 5 SECONDS • PLACE POWERED OFF HOVERBOARD ON A FLAT SURFACE. HOLD THE POWER BUTTON FOR 5 SECONDS UNTIL TUNE IS COMPLETED. • LET GO OF POWER BUTTON AND THEN PRESS IT AGAIN TO TURN HOVERBOARD OFF. •... -
Page 29: Turning The Lights On
CHARGING PORT REAR SEAT WIRE Turning the Lights On 1.11 • LEVEL THE SEAT AND HOVERBOARD BEFORE CONNECTING THE SEAT WIRE TO THE HOVERBOARD'S CHARGING PORT. • MAKE SURE SIDE OF HOVERBOARD WITH CHARGING PORT IS FACING OUT. • CONNECT THE REAR SEAT WIRE TO THE HOVERBOARD’S CHARGING PORT. •... -
Page 31: Getting On The Remix
2. Make Moves Getting on the Remix • PLACE THE REMIX ON A FLAT SURFACE WITH THE HOVERBOARD TURNED OFF. • CAREFULLY SIT IN REMIX PLACING YOUR FEET ON THE FOOTREST. • MAKE SURE THE HOVERBOARD IS LEVELED. • TURN ON HOVERBOARD. NOTE: DO NOT TURN ON THE HOVERBOARD BEFORE YOU SIT DOWN. -
Page 32: Helmet Safety
Helmet Safety PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. COULD CAUSE SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. CLOSED-TOE, FLAT SHOES ARE RECOMMENDED. WEAR AN ASTM F1492 APPROVED HELMET AND PROTECTIVE GEAR TO PREVENT INJURY IN THE EVENT OF AN ACCIDENT. -
Page 33: Riding The Remix
Riding the Remix. NOTE: TIGHTEN ALL SCREWS AND LOCKING NUTS BEFORE EACH RIDE. TO GO FORWARD - PUSH DOWN BOTH HANDLES TO BRAKE / REVERSE - PULL UP BOTH HANDLES TO TURN RIGHT – PUSH DOWN LEFT HANDLE, TO TURN LEFT – PULL UP LEFT HANDLE, PULL UP RIGHT HANDLE PUSH DOWN RIGHT HANDLE... - Page 34 22° 22° NOTE: DON'T PULL UP OR DOWN ON THE HANDLES TOO HARD AS IT MAY CAUSE DAMAGE TO LOCK. THE HANDLES WILL LOCK IN PLACE WHEN PULLED 22° UP AND 22° DOWN BASED ON NETURAL POSITION OF BRACKETS.
-
Page 35: Riding The Hoverboard
Riding the Hoverboard NEUTRAL TURN LEFT TURN RIGHT... -
Page 37: Care & Maintenance
All new Jetson products, excluding parts and accessories, are warranted against defects in materials and workmanship for a period of one year from the date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support). - Page 38 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 40 UK +44 (0)33 0838 2551 Mex: +001 888 976 9904 Hours of Operation: 7 Days a Week, 10am-6pm Imported by Jetson Electric Bikes LLC. P.O. Box 320149, 775 4th Ave #2, Brooklyn, NY 11232 www.ridejetson.com Made in China Date Code: 03/2022...
Need help?
Do you have a question about the REMIX JETKART and is the answer not in the manual?
Questions and answers