Related Manuals for Jetson JALPHA-BLK
Summary of Contents for Jetson JALPHA-BLK
- Page 1 Alpha L Race Kart + All-Terrain Hoverboard. A guide for your ride. IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY MODEL: JALPHA-BLK | JALPHA2-BLK Designed in Brooklyn | Made in China...
- Page 3 Remember to be safe and, most importantly, have fun!
-
Page 5: Table Of Contents
Table of Contents Safety Warnings .......................4 What’s in the Box .......................6 Specs &... -
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 For more information go to www.p65warnings.ca.gov/product MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from Jetson Customer Care. This will void any warranty, and can lead to malfunctions which may cause injury.
-
Page 8: What's In The Box
What’s in the Box 1. FRAME 2. SEAT 3. CUSHION 4. HOVERBOARD 5. BRACKET (2X) 6. VELCRO STRAP (2X) 7. FOOTREST (2X) 8. NOSE CAP HARDWARE / TOOLS INCLUDED: A (6X) B (4X) C1 (3X) C2 (2X) D (2X) WRENCH SCREW *ADULTS MUST ASSIST CHILDREN IN THE INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT. - Page 9 PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 11: Specs & Features
Specs & Features ALPHA L: • WEIGHT LIMIT: 220 LB • PRODUCT WEIGHT: 16 LB • RECOMMENDED AGE: 12+ • TIRE SIZE: 4” • DIMENSIONS: 47.3” (L) × 22.8” (W) × 15.3” (H) HOVERBOARD: • MAX SPEED: UP TO 9 MPH •... -
Page 14: Attaching The Seat
1. Get Started Attaching the Seat • TURN SEAT ON ITS SIDE AND ALIGN FRAME TO MATCH BOLT HOLES. • PLACE WASHER (B) ONTO BOLT (A) AND THREAD BOLT INTO THE HOLE UNTIL FAIRLY TIGHT. • REPEAT USING REMAINING 3 BOLTS AND WASHERS. •... - Page 15 • MAKE SURE SEAT IS SECURELY ATTACHED.
-
Page 16: Attaching The Cushion
Attaching the Cushion • TEAR OFF THE WHITE PROTECTIVE PAPER ON THE UNDERSIDE OF CUSHION. CUSHION PROTECTIVE PAPER... - Page 17 • CAREFULLY PLACE THE CUSHION TO THE SEAT GLUE SIDE DOWN.
- Page 18 • MAKE SURE CUSHION IS SECURELY ATTACHED TO THE SEAT.
-
Page 19: Inserting The Brackets
Inserting the Brackets • INSERT RIGHT BRACKET INTO RIGHT SIDE OF THE REAR HORIZONTAL AXIS. • SCREW BRACKET IN PLACE USING BOLT (A) AND WASHER (D). • INSERT LEFT BRACKET INTO LEFT SIDE OF THE REAR HORIZONTAL AXIS. • SCREW BRACKET IN PLACE USING BOLT AND WASHER. NOTE: BE CAREFUL NOT TO OVER-TIGHTEN THE BOLTS. - Page 20 • MAKE SURE BRACKETS ARE SECURELY ATTACHED.
-
Page 21: Attaching The Nose Cap
Attaching the Nose Cap NOSE CAP • SNAP NOSE CAP ONTO FRONT PLATE OF ALPHA L. • SCREW (C1) NOSE CAP INTO PLACE VIA THE UNDERSIDE OF THE FRAME. NOTE: DO NOT OVERTIGHTEN THE NOSE CAP. DOING SO MAY CAUSE THE NOSE CAP TO CRACK. - Page 22 • MAKE SURE IT IS SECURELY ATTACHED.
-
Page 23: Inserting The Footrests
Inserting the Footrests • INSERT FOOTREST INTO EACH SIDE OF THE FRONT TUBE ON THE ALPHA L FRAME. • ALIGN FOOTREST WITH SCREW HOLES ON THE FRONT TUBE. • USING THE SMALL SCREW (C2) SUPPLIED, SCREW PEDALS IN PLACE. FOOTREST... - Page 24 • MAKE SURE FOOTREST ARE SECURELY IN PLACE.
-
Page 25: Attaching The Hoverboard
HOVERBOARD Attaching the Hoverboard • PLACE ALPHA L ON TOP OF HOVERBOARD. MAKE SURE HOVERBOARD IS TURNED OFF WHEN DOING THIS. VELCRO STRAPS... - Page 26 PULL THE VELCRO STRAPS TIGHT AND FOLD.
- Page 27 • MAKE SURE HOVERBOARD IS SECURELY IN PLACE.
-
Page 28: Charging The Hoverboard
Charging the Hoverboard • ONLY USE THE INCLUDED CHARGER • PLUG THE CHARGER INTO THE WALL BEFORE THE CHARGING PORT • DON’T TURN ON THE ALPHA L HOVERBOARD WHILE IT’S CHARGING • CHARGE THE BATTERY UNTIL IT IS FULLY CHARGED - UP TO 4 HOURS - CHARGING - CHARGE COMPLETE INDICATOR LIGHT... -
Page 29: Indicator Lights
Indicator Lights BATTERY INDICATOR LIGHT STATUS INDICATOR LIGHT BATTERY INDICATOR LIGHT PERCENTAGE < 20% 20-49% 50% + WARNING: THE HOVERBOARD WILL AUTOMATICALLY SLOW DOWN AND TILT UP ONCE THE BATTERY POWER GOES BELOW 10% AS A SAFETY PRECAUTION. STATUS INDICATOR LIGHT STATUS LIGHTS UP BLUE WHEN YOU STEP RECALIBRATE YOUR... -
Page 30: Connecting To Bluetooth
THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY THE BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY JETSON ELECTRIC BIKE LLC. IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS. -
Page 31: Recalibrating The Hoverboard
Recalibrating the Hoverboard 1.11 HOLD POWER BUTTON FOR 5 SECONDS • PLACE POWERED OFF HOVERBOARD ON A FLAT SURFACE. HOLD THE POWER BUTTON FOR 5 SECONDS UNTIL TUNE IS COMPLETED. • LET GO OF POWER BUTTON AND THEN PRESS IT AGAIN TO TURN HOVERBOARD OFF. •... -
Page 32: Turning The Lights On
CHARGING PORT REAR SEAT WIRE Turning the Lights On 1.12 • LEVEL THE SEAT AND HOVERBOARD BEFORE CONNECTING THE SEAT WIRE TO THE HOVERBOARD'S CHARGING PORT. • MAKE SURE SIDE OF HOVERBOARD WITH CHARGING PORT IS FACING OUT. • CONNECT THE REAR SEAT WIRE TO THE HOVERBOARD’S CHARGING PORT. •... -
Page 33: Getting On The Alpha L
2. Make Moves Getting on the Alpha L • PLACE THE ALPHA L ON A FLAT SURFACE WITH THE HOVERBOARD TURNED OFF. • CAREFULLY SIT IN ALPHA L PLACING YOUR FEET ON THE FOOTREST. • MAKE SURE THE HOVERBOARD IS LEVELED. •... -
Page 34: Helmet Safety
Helmet Safety THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. COULD CAUSE SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. CLOSED-TOE, FLAT SHOES ARE RECOMMENDED. WEAR AN ASTM F1492 APPROVED HELMET AND PROTECTIVE GEAR TO PREVENT INJURY IN THE EVENT OF AN ACCIDENT. -
Page 35: Riding The Alpha L
Now for the fun part. Riding the Alpha L. NOTE: TIGHTEN ALL SCREWS AND LOCKING NUTS BEFORE EACH RIDE. TO GO FORWARD - PUSH DOWN BOTH HANDLES TO BRAKE / REVERSE - PULL UP BOTH HANDLES TO TURN RIGHT – PUSH DOWN LEFT HANDLE, TO TURN LEFT –... -
Page 36: Riding The Hoverboard
Riding the Hoverboard NEUTRAL TURN LEFT TURN RIGHT... -
Page 37: Care & Maintenance
• DO NOT USE WATER TO CLEAN THE ALPHA L, AS THE ELECTRICAL AND ELECTRONIC SYSTEMS MAY GET WET, RESULTING IN PERSONAL INJURY OR MALFUNCTION OF THE ALPHA L. • IF THE ELECTRIC PARTS OR BATTERY GET WET, DO NOT POWER ON THE ALPHA L. PLEASE CONTACT JETSON CUSTOMER CARE FOR ASSISTANCE. - Page 39 Enjoying the ride? Leave a review on ridejetson.com/reviews or share your photos with us online using the #RideJetson hashtag! Follow us @ridejetson #MakeMoves...
- Page 40 MEX: +001 888 976 9904 UK +44 (0)33 0838 2551 Hours of Operation: 7 Days a Week, 10am-6pm Imported by Jetson Electric Bikes LLC. P.O. Box 320149, 775 4th Ave #2, Brooklyn, NY 11232 www.ridejetson.com Made in China Date Code: 02/2022...
Need help?
Do you have a question about the JALPHA-BLK and is the answer not in the manual?
Questions and answers