Table of Contents
Advertisement
nector (A) and two mounting holes (B) inside the scanner, as shown below in Figure
4.
ese match the pins and connector of the Feeder.
A
B
Feeder with the holes and connector inside the scanner. Gently press the Feeder down
the connector.
updates with new instructions.
Done to close the Mount feeder window.
7
-
Figure 4: Flextight
949 Scanner with the
batch-feeder panel open,
showing the electrical
connector (A)
and mounting holes (B).
Mount feeder window
Advertisement
Table of Contents
Need help?
Do you have a question about the Batch Feeder and is the answer not in the manual?