Loading Originals Into The Feeder - Hasselblad Batch Feeder User Manual

Done to close the Mount feeder window. You now return to the Feeder
window.
Done to close the Feeder window.

Loading Originals into the Feeder

A
B
To load originals into Batch Feeder, refer to Figure 5 and do the following:
Important!
1. Use only original holders (A
(B), otherwise the Feeder will not be able to unload the holder properly.
3. Place the original holder (A
gently into the slot until it comes to a stop. (To remove the original holder, just slide it
NOTE!
and down, starting from position 1.
either loaded all of your originals or used all 10 slots of the Batch Feeder.
9
C
Pos. 1
Pos. 10
Figure 5: Loading originals into the Feeder
A). See your scanner docu-