ADJ myDMX GO User Manual page 7

S A F E T Y G U I D E L I N E S
DO NOT attempt installation and/or operation of device without knowledge how to do so.
DO NOT permit operation by persons who are not qualified to operate this type of device.
DO NOT shake device, avoid brute force when installing and/or operating.
DO NOT operate device if the power supply cable has become frayed, crimped and/or damaged, or if
any of the connectors do not insert into the device securely with ease.
DO NOT force cable connectors into device.
DO NOT remove or disassemble device, there are NO user serviceable parts inside.
ALWAYS disconnect device from main power source before cleaning.
ALWAYS be sure to use this device in an area that will allow proper ventilation.
ALWAYS disconnect power cable during long periods of non-use.
All cables should be safely routed and secured so they are not likely pinched.
Only use recommended rigging hardware as described in this guide.
Use the original packaging and materials to transport this device in for service.
This device should be serviced by qualified service personnel when:
• The power cord or plug has become damaged.
• Objects have fallen on and/or liquid has spilled into the device.
• The device has been exposed to rain and/or moisture.
• The device does not operate normally or exhibits a marked change in performance.
7