12 Ton Axle Jack This product can not be modified without the written approval of Tronair, Inc. Any modifications done without written approval voids all warranties and releases Tronair, Inc., it suppliers, distributors, employees, or financial institutions from any liability from consequences that may occur.
Model: 02-7862C0100 12 Ton Axle Jack ASSEMBLY INSTRUCTIONS GENERAL INFORMATION This product should be assembled and/or repaired using good workmanship practices and proper tools. All replacement parts must be the same as or equal to the original parts supplied. PRE-USE CHECKS Refer to the Parts Lists and Illustrations to identify and ensure that all parts are present.
Model: 02-7862C0100 12 Ton Axle Jack MAINTENANCE GENERAL All maintenance and/or repair work should be done using good workmanship practices and proper tools. The work area should be clean and free of dirt. When O-rings and backup rings are removed, every effort should be made to avoid the contact of tools with the critical surfaces of parts.
Page 7
GUARANTEES/LIMITATION OF LIABILITY Tronair products are warranted to be free of manufacturing or material defects for a period of one year after shipment to the original customer. This is solely limited to the repair or replacement of defective components. This warranty does not cover the...
Page 8
Model: 02-7862C0100 12 Ton Axle Jack Parts List When ordering replacement parts/kits, please specify model, serial number and color of your unit. OR IE NT AT ION O F O-R IN G AN D BA CK UP RI NG ON...
Page 9
Model: 02-7862C0100 12 Ton Axle Jack Parts List When ordering replacement parts/kits, please specify model, serial number and color of your unit. Item Part Number Description N-2203-06-S Nipple, Pipe TF-1104-01*31.0 Assembly, Hose (#4 Mineral Base) N-2009-08-S Connector, Male N-2712 Coupler, Hydraulic (Female)
Page 10
Model: 02-7862C0100 12 Ton Axle Jack Parts List When ordering replacement parts/kits, please specify model, serial number and color of your unit. Item Part Number Description H-1026*07.0 Assembly, Lanyard Reference K-2728 Nose Adapter Assembly Kit R-1671 Pin, Sliding G-1310-0415 Pin, Ball Lok-T, ¼" diameter x 1.5" Grip...
Page 11
APPENDIX I Enerpac Hand Pump Instructions & Repair Parts...
Page 23
APPENDIX II Safety Data Sheet MIL-PRF-5606 Hydraulic Fluid...
DECLARATION of CONFORMITY The design, development and manufacture is in accordance with European Community guidelines Axle Jack 02-7862C0100 Relevant provisions complied with by the machinery: 2006/42/EC Relevant standards complied with by the machinery: EN ISO 12100-1 Identification of person empowered to sign on behalf of the Manufacturer: Quality Assurance Representative Tronair, Inc.
Need help?
Do you have a question about the 02-7862C0100 and is the answer not in the manual?
Questions and answers