Preparing The Blender For Use; Before First Use; Blender Assembly - KitchenAid KSB655CS Instructions Manual

Preparing the Blender for Use

Before First Use

Before using your Blender for the first time,
wipe Blender base with a warm sudsy cloth,
then wipe clean with a damp cloth. Dry with
a soft cloth. Wash pitcher, accessory jar, lid(s),
locking collar and blade assembly, sealing
ring, ingredient cup and drizzle cap in warm,
sudsy water (see Care and Cleaning, page
13). Rinse parts and wipe dry.

Blender Assembly

1. Put locking collar with blade assembly
pointing up on a sturdy surface.
2. Put sealing ring, flat side down, around
the blades and into the groove within
the locking collar.
3. Align the pitcher or accessory jar tabs
with the slots of the locking collar.
4. Press down and rotate pitcher or
accessory jar clockwise, approximately
¼ turn until two clicks are heard.
5. Adjust the length of the Blender
power cord.
Sealing
6. Put pitcher or accessory jar assembly
Ring
onto the Blender base.
Locking
Collar
8