Preparing The Blender For Use; Before First Use; Blender Assembly - KitchenAid RKSB650CS Instructions Manual

Preparing the Blender for use
Before first use
Before using your Blender for the first time,
wipe Blender base with a warm sudsy cloth,
then wipe clean with a damp cloth. Dry with
a soft cloth. Wash pitcher, accessory jar, lid(s),
locking collar and blade assembly, sealing
ring, ingredient cup and drizzle cap in warm,
sudsy water (see Care and Cleaning, page
13). Rinse parts and wipe dry.
Blender with Pitcher or Accessory Jar
Assembly
1. Put locking collar with blade assembly
pointing up on a sturdy surface.
2. Put sealing ring, flat side down, around
the blades and into the groove within
the locking collar.
NotE: For easier jar and collar assembly,
you can dip the gasket in water before
placing it into the collar. A damp gasket
makes it easier to attach the glass jar to
the collar.
3. Align the pitcher or accessory jar tabs
with the slots of the locking collar.
4. Press down and rotate pitcher or
accessory jar clockwise, approximately
¼ turn through two steps of resistance.
sealing
Ring
5. Adjust the length of the Blender
Locking
power cord.
collar
8