Assembling Your Immersion Blender - KitchenAid KHB100OB - 8" Immersion Blender Instructions Manual

Assembling Your Immersion Blender

1. Before using the KitchenAid
Immersion Blender for the first
time, wipe the motor body and
attachment adapters with a clean,
damp cloth to remove any dirt or
dust. Mild dish soap may be used,
but do not use abrasive cleansers.
NOTE: Do not immerse the motor
body or the adapters in water.
Dry with a soft cloth. Wash all the
attachments and accessories by
hand or in the dishwasher. Dry
thoroughly.
NOTE: Always be sure to unplug the
power cord from the wall socket
before attaching or removing
attachments.
2. Install attachments by aligning the
motor body with either the
blending attachment or an
attachment adapter (Models
KHB200 and KHB300 only). Insert
the blending attachment or
attachment adapter into the motor
body until it locks with a click.
Whisk Adapter
®
Blending
Attachment
Chopper Adapter
3. Remove the attachments by
pressing both ejector buttons on
either side of the body.
4. Read Operating Tips (page 13).
8