Setting Up Your Internet Connection; Before You Begin; Connecting Using Ethernet Wan; Here's How Things Connect To The Ethernet Wan Interface - Casa Systems NetComm CF60 User Manual

Setting up your Internet connection

If you received your gateway from your service provider and they have provided you with their own instructions, refer to those to
Note – complete the setup. In some cases, the gateway has been pre-configured for you and is ready to use. Otherwise, you will need to
complete the setup yourself.

Before you begin

Ensure that you have the following information from your service provider:
How your Internet service will physically connect to your gateway.
⚫
The settings specific to your type of service.
⚫

Connecting using Ethernet WAN

Ethernet WAN is the most common internet connection interface in Australia and New Zealand and covers
most Australian NBN and New Zealand UFB network access technologies.
This type of Internet service uses the red WAN port on the back of the gateway to connect to the dedicated
connection box installed by your wholesale provider, such as NBN.

Here's how things connect to the Ethernet WAN interface

AXE11000 Wi-Fi 6E Gateway – User Guide
UG01465 v. 1.00 5 December 2023
Figure 1 – Connecting to Ethernet WAN
7 of 90