Using Wps; Connecting A Telephone - Casa Systems NetComm CF60 User Manual

Using WPS

Where supported by your devices, such as laptops and smart phones, you can use Wi-Fi Protected Setup
(WPS) to connect your devices. To activate WPS on the gateway, press the WPS button for three seconds,
then release. The WPS indicator blinks when WPS pairing mode is active. On your device, activate the WPS
pairing functionality to complete the connection.

Connecting a telephone

Connect a regular telephone handset to the gateway as shown below. To use the phone, you will need to
have a VoIP service from your carrier, complete the setup wizard and enter your VoIP settings.
AXE11000 Wi-Fi 6E Gateway – User Guide
UG01465 v. 1.00 5 December 2023
Figure 5 – Activating WPS
Figure 6 – Connecting a telephone
10 of 90