Table of Contents
Advertisement
Configuring your gateway
To complete the setup, you will need the following information from your service provider:
Connection type (PPPoE/IPoE/Bridging)
⚫
Other specifics depending on your connection type including 802.1P priority, VLAN Tag, WAN IP
⚫
Address, Subnet Mask and DNS Servers
VoIP settings from your service provider if you intend to use a phone with your service.
⚫
When you have the necessary information, follow these steps:
1
Push the power button on the rear of the gateway to turn it on. Wait a few minutes for it to complete
start up.
2
Connect to the gateway using Wi-Fi, or by connecting an Ethernet cable from one of the LAN ports on
the rear of the router to your Ethernet enabled computer.
3
Open a web browser and navigate to 192.168.20.1.
4
Follow the
Basic Setup
Connecting to Wi-Fi
Your Wi-Fi Security Card includes your unique network name and password. Type the information into your
wireless device when connecting or scan the QR code that is printed on the card.
AXE11000 Wi-Fi 6E Gateway – User Guide
UG01465 v. 1.00 5 December 2023
wizard to complete the configuration.
Figure 2 - Connecting with Wi-Fi
8 of 90
Advertisement
Table of Contents
Need help?
Do you have a question about the NetComm CF60 and is the answer not in the manual?