PCB Piezotronics IMI SENSORS ICP EX604 Series Installation And Operating Manual page 30

Manufacturer:
PCB Piezotronics, Inc.
3425 Walden Avenue
Depew, New York 14043
Certifies that type of equipment:
Whose Product Models Include:
This declaration is applicable to all sensor of the above series which have the CE mark on their data sheets and where those data sheets refer
to this declaration of conformity. The data sheets for all ICP® model numbers referenced above, which include the CE mark on such data sheets
and refer to this Declaration of Conformity are hereby incorporated by reference into this Declaration.
Conform to the following EU
Directive(s) when installed per
product documentation:
Harmonized EN 61326-1:2013
Standards
EN 61326-2-3: 2013
EN 61010-1:2010
EN 61010-1:2010/A1:2019/AC:2019-04
EN 61010-1:2010/A1:2019
EN 60079-0:2018
EN 60079-11:2012
EN 63000:2018
Emissions EN 55011:2016,
Test EN 55011:2016/A1:2017
Standards EN 55011:2016/A11:2020
Other EN 61000-4-2:2009
Standards
Applied (non-
OJEU)
EN 61000-4-3:2006+
Immunity A2:2010
Test
Standards EN 61000-4-4:2012
EN 61000-4-5:2014
PS098 REV. E 03/07/2023
EU Declaration of Conformity PS098
In Accordance with ISO/IEC 17050
USA
"X"
Note: is a place holder for one letter.
"YYY"
is a place holder for up to three numbers.
For example: EX604M05
These letters and numbers are included in the model numbers of the series. For details see the related data
sheets.
2014/30/EU
2014/34/EU
2011/65/EU w/2015/863/EU
Harmonized Standards to which Conformity is Declared:
Authorized European Representative:
Industrial Triaxial Accelerometer
EX604XYYY
Electrical Equipment for Measurement, Control and Laboratory Use- EMC requirements
- Part 1: General requirements
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-3: Particular requirements - Test configuration, operational conditions and
performance criteria for transducers with integrated or remote signal conditioning
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory
Use - Part 1: General Requirements
General Explosive Atmosphere
Intrinsic safe, i
Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
Industrial, scientific and medical (ISM) radio frequency equipment-Electromagnetic
disturbance characteristics- Limits and methods of Measurement Class B
Electromagnetic compatibility (EMC)–Part 4–2: Testing and measuring techniques–
Electrostatic discharge immunity test
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic field immunity test
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques -
Electrical fast transient/burst immunity test
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques -
Surge immunity test
PCB Piezotronics Europe GmbH
Porschestrasse 20-30
41836 Hückelhoven
Germany
EMC Directive
ATEX Directive
RoHS Directive
Page 1 of 4