PCB Piezotronics IMI SENSORS ICP EX604 Series Installation And Operating Manual page 25

L
ntertek
Total Quality. Assured,
TYPE EXAMINATION
CthiHcMft
Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive
2014/34/EU
1. Type Examination Certificate Number: 1TS18ATEX203388X Issue 01
2. Product:
Piezoelectric Vibration Sensor model EX604XYYY
3.
Manufacturer:
IMI Sensors a Division of PCB Piezotronics
4. Address:
3425 Walden Ave
Depew, NY 14043-2417
USA
5.
This product and any acceptable variation thereto is specified in the schedule to this certificate and
the documents therein referred to.
6. Intertek Testing and Certification Limited, certifies that this product has been found to comply with
the Essential Health and Safety Requirements relating to the design and construction of the
products intended for use in potentially explosive atmospheres given in Annex II of Directive
2014/34/EU of the European Parliament and of the Council, dated 26 February 2014.
7.
Compliance with the Essential Health and Safety Requirements has been assured by compliance
with EN 60079-0:2012+A11:2013, EN 60079-11:2012 and EN 60079-15:2010 except in respect of
those requirements referred to within item 14 of the Schedule
8.
If the sign "X" is placed after the certificate number, it indicates that the product is subject to the
special conditions of use specified in the Schedule to this certificate.
9.
This Type Examination Certificate relates only to the design of the specified product and not to
specific items subsequently manufactured.
10. The marking of the product shall include the following:
113 G ExiclICT4Gc
qD
113GExnAllCT4Gc
-54'C:5 Ta :5 121°C
Certification Officer:
Date:
18 December 2019
Kevin J. Wolf
This Certificate is for She exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or
advertisement of the tested material, product or service most first be approved in writing by Intertek.
Intertek Testing & Certification Limited, Cleeve Road, Leatherhead, Surrey, KT22 7SA
Registered No 3272281 Registered Office: Academy Place, 1-9 Brook Street, Brentwood, Essex, CM14 SNO.
© 2019 INTERTEK
Page 1 of 3 [Document Control No. CT-R-UK-Cert-39291