aidapt VG811C Usage And Maintenance Instructions page 4

3) Attach padded seat (A) to seat frame (C) using 2x thumb wheels (M),
ensuring they are attached tightly. (fig. 5)
Please Note: Padded seat can be moved forward or backward.
ADJUSTING SEAT & BACK POSITION
The back and seat can be adjusted to suit the user's requirements. Simply unscrew the 2x thumb wheels (M)
(fig. 5 or fig. 6), reposition the back of seat as required, then tighten both thumb wheels.
CLEANING
A useful guide to decontamination is MHRA leaflet DB2003(06).
Do not use abrasive cleaners as this could damage the surface of the equipment. For cleaning, wipe with a clean
cloth soaked in detergent solution and wring out. Depending on the detergent manufacturer's instructions, the
solution may be heated.
• Wipe all surfaces of the equipment and the cloth should be re-immersed periodically and the detergent changed
frequently. The detergent should be rinsed or wiped off using a clean cloth immersed in clean water and wrung
out.
• To disinfect, make sure the equipment has been cleaned and dried and then wipe over with a clean cloth and a
compatible liquid disinfectant. After disinfecting, clean with clean water and dry.
• When using detergent or disinfectants, please refer to manufacturers' instructions, and if unsure, please consult
your local Infection Control Specialist for advice.
• This product is not suitable for cleaning with moist heat or autoclaving.
REISSUE
If you reissue or are about to reissue this product then please check all components for safety and in particular
tighten all the nuts and bolts, that the chair is steady, no rips or splits in the upholstery, and that the 'E' clips are
fitted correctly.
December 2021
4) Attach padded back rest (B) to rear
seat frame (D), using 2x thumb
wheels (M), ensuring they are
attached tightly. (fig. 6)
Please Note: Padded back can be
moved upwards or downwards.
Fig. 5
4
Fig. 6