Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for aidapt VG866A
Summary of Contents for aidapt VG866A
- Page 1 Overbed Table VG866A Usage and Maintenance Instructions...
-
Page 2: Before Use
INTRODUCTION Thank you for purchasing the Overbed Table from Aidapt. BEFORE USE • Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may damage the surface of the product. • Check the product for any visible damage. If you see any damage or suspect a fault, do not use your product, but contact your supplier for support. - Page 3 After inspection, place the wooden finished table-top face (a) down onto a soft surface to avoid scratches. If required, insert the chrome leg brackets (b) into clamps on the wooden base (a). (fig. 1) (fig. 1) Depress click release pins. (fig. 2-3) (fig.
- Page 4 (fig. 5) Slide L shaped tube (c) over end of chrome L-Shaped tube (b) making sure it is the end of the tube (b) with no click release pins (The ends with the click release plus fit under the table top) Ensure they are both the same height.
- Page 5 Tighten all thumbwheels by turning clockwise before use. (fig. 6) (fig. 6) OPERATION INSTRUCTIONS • To adjust the height and/or angle of the table, first loosen the two short thumbwheels by turning them anticlockwise. Adjust the table to suit and secure by turning thumbwheels clockwise.
-
Page 6: Care And Maintenance
The information given in this instruction booklet must not be taken as forming part of or establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the information is given.
Need help?
Do you have a question about the VG866A and is the answer not in the manual?
Questions and answers