Citronic HIPAR-180 User Manual

HIPAR-180 Item ref: 154.327UK
User Manual
RGBWA+UV Slim IP65 PAR Can
Please read through this manual thoroughly before use, any damage
Caused by misuse of product will not be covered by warranty.
High power slim LED PAR can fitted with 18pcs of 10W super bright 6-in-1 COB LEDs built into an IP65
weatherproof housing for outdoor or indoor applications. Can be operated standalone from the internal
auto programs or via DMX512 controller is more precise control is required. Pre-wired with waterproof
power and DMX signal leads for easy connection and daisy-chaining. Supplied with split bracket which can
also be used as a floor stand. Ideal solution for parties and events where background colour wash or U/V
illumination is required.
In the box:
Your HIPAR should arrive with you in a single carton in good condition. The carton should contain
1 x main unit, 1 x stand/mounting bracket and thumbscrews, UK mains plug to waterproof socket
extension lead (1m), DMX XLR plug to waterproof socket lead (1m) and 1 x user guide.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 154.327UK User Manual