Citronic MP-X10 Manual

Traktor map manual

Hide thumbs Also See for MP-X10:

TRAKTOR MAP MANUAL

Version 1.0

Table of Contents

Need help?

Do you have a question about the MP-X10 and is the answer not in the manual?

Page 1 TRAKTOR MAP MANUAL Version 1.0...
Page 2 CITRONIC MP-X10 Initial Setup Before making or changing the connections, switch off the power and disconnect the power cord from the AV outlet. We recommend to use high quality shielded audio cables when connecting input/output devices as it makes a huge difference in sound reproduction quality.
Page 3: Traktor Setup
Traktor Setup 1) Connect the supplied USB cable (or any A to B USB lead that is version 2.0 or above) to the USB MIDI connection on the rear of the MPX10 unit. 2) Connect the USB A connection to a PC or Laptop and turn the power on 3) Ensure the channel outputs on the MPX10 are both set to “PC”...
Page 4 5) Load Traktor. 6) Click on “PREFERENCES”, then click “IMPORT”. Select the “MPX10.tsi” file and click open. 7) Click on Audio output and ensure that the MPX10 is set as the sound card to ensure output is played from the controller unit. 8) Click on “OUTPUT Routing”...
Page 5 See the next section for the Functions that each button has while operating TRAKTOR FRONT PANNEL OPERATION Note the microphone channel will not work as a MIDI input through Traktor but will continue to work independently through the MP-X10 unit when in PC mode.
Page 6 TOP PANNEL OPERATIONS...
Page 7 FOR MORE INFORMATION ON CITRONIC PRODUCTS VISIT WWW.CITRONIC.COM Copyright protected by Citronic UK...