Download Print this page

Citronic HexaPAR User Manual

40w cob led rgbw par light

Advertisement

Quick Links

HexaPAR
Item ref: 154.070UK
User Manual
40W COB LED RGBW PAR Light
Please read through this manual thoroughly before use, any damage
Caused by misuse of product will not be covered by warranty.
Stylish and sturdy, this Retro-style hexagonal PAR light is fitted with a bright 40W RGBW COB LED that
produces an array of 15 eye-popping colours. The unit can be controlled by auto, sound-to-light,
master/slave programs or via 5/7/9 channel DMX for more precise control.
In the box:
Your HexaPAR should arrive with you in a single carton in good condition. The carton should contain
1 x main unit, 1x Dual mounting bracket and thumbscrews, 1 x UK IEC mains lead and 1 x user guide.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com
154.070UK User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the HexaPAR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Citronic HexaPAR

  • Page 1 In the box: Your HexaPAR should arrive with you in a single carton in good condition. The carton should contain 1 x main unit, 1x Dual mounting bracket and thumbscrews, 1 x UK IEC mains lead and 1 x user guide.
  • Page 2 Placement: • Keep away from damp or dusty environments. • Ensure adequate airflow around the fixture housings. • Ensure adequate access to controls and connections. Cleaning: • Use a soft cloth with a neutral detergent to clean the casing as required. •...
  • Page 3 DMX mode: The HexaPAR can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit.
  • Page 4 1-255 White dimmer 1-255 White dimmer 0-050 Linear dimmer, 051-101 0-005 No function, 006-125 Exponential curve dimmer, 102- Colour select 1-15, 126-128 152 Logarithmic curve dimmer, Colour stop, 129-192 Colour 153-204 S-Curve dimmer, 205- jump (slow to fast), 193-255 255 Halogen effect dimmer Colour fade slow to fast 0-005 Sound control off, 006- 255 Sound sensitivity (low to...

This manual is also suitable for:

154.070uk