Advertisement
Quick Links
Advertisement
Related Manuals for JARDAN Andy
Summary of Contents for JARDAN Andy
- Page 1 Andy Bed Assembly Instructions Andy Bed jardan.com.au...
- Page 2 Andy Bed Assembly Instructions Components Required A 1 x Headboard 1 x Cordless Torque Drill on low setting B 2 x Side rails (to prevent damage) C 1 x Foot rail 1 x 5/16 Hex nut socket drive D 1 x Center rail...
- Page 3 Andy Bed Assembly Instructions Unwrap and familiarise yourself with all components. Loose cover will be partially attached to headboard A. Legs E will be pre-attached to the side rails. Fasten side rails B to headboard A one at a time using 4 screws G per bracket.damage.
- Page 4 Andy Bed Assembly Instructions Pull the loose cover over the foot rail C at each corner by compressing the foam until the fabric cover slides over the top. Straighten cover so the seam edge runs along the outside edges of side and foot rails.
-
Page 5: Care And Maintenance
Our philosophy is simple, we only make furniture that lasts. Over their lifetime our products will need a little care and attention to ensure they can be enjoyed by generations to come. The following information will help you care for your Jardan products in the best possible way.
Need help?
Do you have a question about the Andy and is the answer not in the manual?
Questions and answers